Close
3M BALL MARKERS
- 5-ft detection range
- Self-levelling design for precise and horizontal positioning
- Offers easy marking of buried power lines
- Passive antenna encased in green water-resistant polyethene shell
- Withstands a temperature range of -4 to 122 degrees F (-20 to 50 degrees C)
- Works without any external power source
Close
3M Dynatel Advance Cable/Pipe Locator 2220M
• Locates pipes, cables and tracer wire
• Detects power signals
• Locates Sondes and pipeline inspection cameras
• Detects cathodic protection signals
Close
3M Dynatel Cable/Pipe/Fault and Marker Locator 2273M-iD
- Gas Industry
- Power Industry
- Fault Finding
- Read, Write and Locate Markers
Close
3M ELECTRONIC MARKING SYSTEM(EMS)
- They can be installed near or above buried assets
- They are easy to follow, creating a detectable path above ground
- For use in open trench and HDD (Horizontal Directional Drilling) applications
Close
3M Marker Solutions
- Saves time and money
- Improves asset management
- Damage avoidance.
- Lifetime warranty for electronic markers
Close
3M™ Dynatel™ Marker Locator 1420 EMS-iD
- Congestion & Grounding
- Common Trench
- Soil Condition or Type
- Facility access Limitation
- Multiple utilities of same type
- Absence of metallic conductor(s)
- Multiple markers in area
- Need to access items of particular interest in buried
facilities that are not locatable using EM locators
Close
CMM-10
The most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
Close
CMM-40
A rugged, hand-held Industrial Multimeter. The CMM-40 was designed for the measurements of:
-
AC/DC voltage
-
AC/DC current
-
resistance
-
capacitance frequency
-
duty cycle
-
temperature
-
testing diodes
-
continuity
Close
CMP-1006
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
Close
CMP-2000
Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
The instrument has an electronic overload protection of all functions and ranges.
Close
CMP-600
- AC and DC current measurement (TRUE RMS) up to 600A.
- AC and DC voltage measurement (TRUE RMS) up to 600V.
- Acoustic signalling programmable for instances of exceeding the MAX/MIN values set.
- Resistance measurement and continuity test:
– continuity test with acoustic signalling (for resistance below 1000). - Frequency measurement.
- Diode test.
- Wireless cooperation with many transmitters.
- CMP-600R compatible with a computer via a USB interface. Software provided.
- The comfortable case for the meter and accessories.
Close
Digital Torque Meter (HP-10 / HP-50 / HP-100)
Digital Torque Meter
Close
HELLERMAN Digital Clamp Meters TBM3030 600A AC
- Jaw size 2 6mm
- Large LCD display
- Diode
- Continuity
- Relative zero
- Data hold
Close
hellermn tyton multimeters whole range
- Robust and splash-proof, the meters can be used to measure various electrical parameters.
- They have four push button type selector switches and a rotary switch.
- The rotary switch provides a selection of measurement parameters:
- AC and DC voltage or current (including mirco and nano), frequency, resistance, continuity (with buzzer), capacitance and diode check.
Close
HOLEX 654240,654250,65400,654390, 654460, 654470
Test certificate Manufacturer’s test certificate
Torque measuring accuracy ±0.5 %
Interface USB interface
The direction of tightening For right and left-hand tightening
Calibration O4
Close
HP-10 / HP-50 / HP-100 Torque Meter
- For measure torque setting of screw drivers, torque driver
- For inspecting, data collection and Quality control
Close
Hunter 191A Thermometer
- Fast, Accurate tip measurements using CA Wire sensor
- Large Display for easy reading
- Easy and quick sensor replacement
Close
Hunter 328 Video Microscope
- Consist of Optical Microscope, CCD Camera and LCD Display
- View Tiny object on screen by video signal camera
- Digital colourful picture with high resolution LCD display
- Zoom objective to desire view
- USB access to computer for data collection and storage
Close
Hunter 336 Electrostatic Field Meter
- For Static Measurement and Ion Balance voltage measurement
- Four Different working mode
- Adjustable test distance
- LCD / Digital Display
- Light, compact in size
- ESD Safe in Design
