3M Marker Solutions
- Saves time and money
- Improves asset management
- Damage avoidance.
- Lifetime warranty for electronic markers
3M™ Dynatel™ Marker Locator 1420 EMS-iD
- Congestion & Grounding
- Common Trench
- Soil Condition or Type
- Facility access Limitation
- Multiple utilities of same type
- Absence of metallic conductor(s)
- Multiple markers in area
- Need to access items of particular interest in buried
facilities that are not locatable using EM locators
3M Dynatel Advance Cable/Pipe Locator 2220M
• Locates pipes, cables and tracer wire
• Detects power signals
• Locates Sondes and pipeline inspection cameras
• Detects cathodic protection signals
3M Dynatel Cable/Pipe/Fault and Marker Locator 2273M-iD
- Gas Industry
- Power Industry
- Fault Finding
- Read, Write and Locate Markers
IDEAL 61-340
Features
- AC/DC voltage
- AC/DC current
- Resistance
- Audible continuity
- Temperature
- Relative mode
- Backlight
- Low battery indication
- Auto power off
- CAT III - 600V
- 2-year warranty
LinkMaster Tester
Wiremap/continuity testing of shielded and unshielded Cat 5/5e/6/6A LAN cable
- Bright LED indicators for working in low light conditions
- Instantaneous test results
- Tests installed twisted pair wiring
- Tests unshielded and shielded modular plugs
CMP-600
- AC and DC current measurement (TRUE RMS) up to 600A.
- AC and DC voltage measurement (TRUE RMS) up to 600V.
- Acoustic signalling programmable for instances of exceeding the MAX/MIN values set.
- Resistance measurement and continuity test:
- continuity test with acoustic signalling (for resistance below 1000). - Frequency measurement.
- Diode test.
- Wireless cooperation with many transmitters.
- CMP-600R compatible with a computer via a USB interface. Software provided.
- The comfortable case for the meter and accessories.
CMP-2000
Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
The instrument has an electronic overload protection of all functions and ranges.
CMP-400,CMP-401
CMP-1006
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
P-2
P-2 Voltage and continuity tester functionality includes:
- AC/DC voltage measurement and an indication
- Resistance measurement and circuit continuity testing
- An indication of phase rotation
- Single pole testing for phase detection
- RCD testing
VT-2
The Non-contact AC Voltage Testers are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety, personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
CMM-40
-
AC/DC voltage
-
AC/DC current
-
resistance
-
capacitance frequency
-
duty cycle
-
temperature
-
testing diodes
-
continuity
CMM-10
The most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
T306 Non-contact Thermometer
The temperature range is from -50°C to 700°C.
Special feature includes adjustable emissivity from 0.1 to 1.0. Max hold, large backlit LCD display, High and Low alarm and a trigger lock for continuous use.
T111 Non-contact Thermometer
- Temperature : ± 2°C/4°F for -30°C 100°C and ± 2% for 101 °C550°C
- Operating Temp : 0°C 50°C
T685 High Temperature Non-contact Thermometer
T890 Safety 3 phase Detector (Non contact)
Clamps over wire insulation without contact on conductor
• Auto off
• Non contact sensor clips
• Open phase and phase sequence
• Magnets on back of unit to mount on metal surfaces
T855 3 phase Rotation Indicator
• Fused test leads
• Rotating disc
• Colour coded red/white/blue
• Large alligator clips
T860 3 phase & Motor Rotation indicator
- Determine rotation of unconnected motors
- Heavy duty alligator clips
- Open phase identification
T887 3 phase Rotation LCD Indicator
- Colour coded red/white/blue
- Large alligator clips
- Indicates phase rotation and phase presence
TBM3030 600A AC
Features
- Jaw size 26mm
- Large LCD display
- Diode
- Continuity
- Relative zero
- Data hold
T77N AC Earth Leakage
•Jaw Size 40mm
•High accuracy with no interference
•Data hold
•Auto power off
•Low pass filter with high stability
•Autorange
•Bargraph
•Auto backlit sensor
•Frequency compare function
