Close
3M Novec 7100 Engineered Fluid
- Non-flammable
- Non-conductive
- Compatible with plastics
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- VOC-exempt solvent (US EPA)
- Low surface tension penetrates tight spaces for improved cleaning
Close
3M Novec 7200 Engineered Fluid
- Non-flammable
- Non-conductive
- Compatible with plastics
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- VOC-exempt solvent (US EPA and CARB)
- Low surface tension penetrates tight spaces for improved cleaning
- Certified Clean Air Solvent in South Coast Air Quality Management District (SCAQMD)
Close
3M Novec 71IPA Engineered Fluid
- Non-flammable
- Non-conductive
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- Low surface tension penetrates tight spaces for improved cleaning
Close
3M Novec 72FL Engineered Fluid
- Fast drying, low odor
- Non-flammable
- Excellent plastics compatibility
- Low toxicity
- No rinsing and no residues
- Low Global Warming Potential (GWP)
- Non corrosive, non-conductive
Close
3M Novec 71DE Engineered Fluid
- Non flammable
- Non-conductive
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- Low surface tension penetrates tight spaces for improved cleaning
Close
3M Novec 71DA Engineered Fluid
- Non-flammable
- Non-conductive
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- Low surface tension penetrates tight spaces for improved cleaning
- Excellent for removal of ionic contamination
Close
3M Novec 72DE Engineered Fluid
- Non-flammable
- Non-conductive
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- Low surface tension penetrates tight spaces for improved cleaning
Close
3M Novec 72DA Engineered Fluid
- Non-flammable
- Non-conductive
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- Low surface tension penetrates tight spaces for improved cleaning
- Excellent for removal of ionic contamination
Close
3M Novec 73DE Engineered Fluid
- Designed for use in vapor degreasers and immersion cleaning
- Cost-effective replacement for nPB, TCE, ozone-depleting HCFCs and high GWP HFCs
- Excellent performance with high solvency and low surface tension
- Effective in cleaning heavy greases, oils, waxes, silicones and non-polar flux residues
- Easy to maintain and use in a vapor degreaser with stable bath composition during extended use
- Non-flammable with an excellent safety profile
- Environmentally sustainable with low global warming potential (GWP) and zero ozone depletion potential (ODP)
- Faster cycle times, lower energy usage and improved cleaning of parts compared to aqueous cleaning
- Effective for lubricant deposition applications where increased solvency is desired
Close
3M Thermally Conductive Epoxy Adhesive TC-2810
- High adhesive strength
- Slight tack allows pre-assembly
- Good surface wet out
- Low viscosity for potting application
- Good gap filling
- Thin bonding line
- Good thermal conductivity (1.0-1.4 W/m-K)
- Low CL ion content and outgassing
Close
3M Epoxy Bonding Adhesive EG-2P-3005
- Fast setting, flexible epoxy adhesive
Close
Chemtronics Silver Conductive Adhesive Epoxy CW2400
- Quick solderless electronic connections
- High strength conductive bonding
- Ideal for bonding surface mount connections, track repair, die attach, static discharge and grounding
- Bonds a wide variety of materials including solder alloys, aluminium, copper and glass
- Compatible with Circuit Works® Conductive and Overcoat pens
- Cure time: 24 Hrs @ 25°C
Close
Chemtronics Silver Conductive Adhesive Epoxy CW2460
- Conductive Silver Epoxy Provides Excellent Electrical and Thermal Conductivity
- Fully Cured Material Offers High Strength Bonds
- Extended Pot Life Provides Sixty Minute Work Time
- High-Strength Solderless Conductive Bonding
- Repairs Defective Traces and Creates Jumpers on Boards
- Quick Solderless Electronic Connections
Close
Chemtronics Silver Conductive Adhesive Epoxy CW2500
- Conveniently-packaged epoxy system that provides a tough, thermally stable, epoxy protective conformal coating.
- Provides a hard, durable, protective green coating
- Excellent dielectric properties; help prevent electrical discharge
- Protects against moisture and abrasion
- Ideal for pre-reflow solder resist repair
- Service temperature from -55°F/-48°C to 600°F/315°C
- Meets the requirements of IPC-7721, 2.4.1
- Ideal for repairing permanent solder mask before reflow applications
- Protects circuits and prevents shorting and arcing
Close
3M Thermally Conductive Grease TCG-2035
- High Performance thermal interface material
- Good bulk conductivity
- Excellent thermal impedance
- < 40 μ max particle diameter
- Non-silicone material
- Thin interface to offer low thermal resistance
- Good wet-out
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7100
- High electrical conductivity
- Excellent thermal conductivity
- Provides protection against wear
- Remains stable in a wide temperature range; 70 to 485°F ( 57 to 252°C)
- Protects against moisture and corrosion
- Very low viscosity vs temperature change
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7100KG
• Fills connector gaps to maximize electrical and
thermal conductivity
• Protects against moisture and corrosion
• Thermally stable from -70°F/-57°C to
485°F/252°C
• Conductive lubricant containing pure silver
• Controls static discharge
• Grounds circuits
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW 7250
- Fills connector gaps to maximize electrical and thermal conductivity
- Maximum electrical conductivity and thermal conductivity
- Protects against moisture and corrosion
- Thermally stable over a wide temperature range
- Conductive lubricant containing pure silver
- Controls static discharge
- Grounds circuits
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7270
- Â Exceeds MIL-C-47113 for thermal conductivity
- Â Noncorrosive
- Â High dielectric strength
- Â Low migration
- Â Stable from -15ï‚°C to 200ï‚°C
- Â Nonflammable
Close
CIRCUIT WORKS CONDUCTIVE GREASE CT40-5
- Â Heat Sink Grease silicone compound facilitates heat transfer away from electrical/electronic components.
- This heavy consistency material is thickened with a heat conductive metal oxide filler to maintain a positive heat sink seal in electrical/electronic equipment.
- Excellent thermal and dielectric properties
- Will not dry out, harden, or melt
- Noncorrosive and nonflammable
Close
3M Thermally Conductive Silicone Interface Pad 5584
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base
- The product tack is such that a mechanical means to support the pad in a final assembly is required
Close
3M Thermally Conductive Silicone Interface Pad 5586
• Good softness and conformability even to non-flat surfaces
• Good thermal conductivity
• Good electrical insulation properties
• Compression relaxation properties reduces pressure to electric components
• Slight tack allows pre-assembly
• Good wettability for improved and lower thermal resistance
Close
3M Thermally Conductive Silicone Interface Pad 5595
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
Close
3M Thermally Conductive Silicone Interface Pad 5595S
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
- This "S" version has a permanent PEN film, 9 micrometer thick, on one side to provide for a non-tacky surface, increased puncture resistance, ease of handling and rework.
