Close
3M™ Fluorinert™ Heat Transfer Fluids
3M™ Novec™ Engineered Fluids and 3M™ Fluorinert™ Electronic Liquids are compatible with
a wide variety of materials used in heat transfer equipment. As with any design, selection of these
materials is very important. Our tech support can help you make the proper choice.
Polymers
Most of the materials commonly considered “hard” plastics will perform well with both Novec
fluids and Fluorinert liquids.
Elastomers
Elastomers should be limited to those that are not heavily plasticized. 3M engineers can assist
you with recommendations and testing on specific compounds.
Close
3M™ Novec™ Contact Cleaner
- Ideal for use on energized components
- Plastic compatible
- Used for removal of fluorinated oils and greases, light oils and silicones,
dust and particulates from sensitive electrical and electronic equipment - Meets MIL-PRF 29608A (Class C)
Close
3M™ Novec™ 1700 Electronic Grade Coating
- Easy application and processing - dries in seconds without the need for thermal post-curing
- Requires little or no masking
- Allows solder-through repairability and is easily removed for rework & repair
- Contains no volatile organic compounds (VOCs) and has low global warming potential
- Is thermally and electrically stable with excellent dielectric properties
- Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
Close
3M™ Thermally Conductive Adhesive Transfer Tape 8805
Electronic Solution, Electronic Tapes, Tapes, Thermal Conductive Materials, Thermal Tapes, Thermal Tapes
- High mechanical strength
- Improved surface wet-out for rough surface/LSE substrates
- Excellent shock performance
- Wider and longer roll is available
- Halogen free
- Ideal for thin bonding applications
- Good thermal transfer
Close
3M™ Embossed Tin-plated Copper Foil on a 3 in Paper Core 1345, 3/8 in x 18 yd, Bulk
- Embossed, copper foil backing resists discoloration and oxidation
- Offers stable contact resistance and good shielding effectiveness
- Embossed backing cuts through the layer of adhesive for establishing contact between the backing and the application substrate
- Tape measures 3/8 in x 18 yds x 4 mil
- Flame-retardant and suitable for grounding and EMI shielding in equipment, components and shielded rooms
- Withstands a wide temperature range of -40 to 266 degrees F (-40 to 130 degrees C)
- Offers outstanding solderability with tin-plated coating
- Rated for 600V applications
- UL Listed and RoHS 2011/65/EU Compliant
- 24 rolls/case
Close
3M™ Twin Axial Cable, SL8800 Series
- High-performance computing clusters
- Data center networks
- IB and GigE switches and routers
- Storage, server, RAID and HBA application
Close
Special Contact Cleaner 1625 Spray
Cleaning, Electrical, Electronic Solution, Spray Solutions, Sprays, Sprays, Sprays and Resins, Weather Protection
- Loosens dirt, light oxide layers, and impurities of every kind in
an effective gentle manner. - Electrically neutral and totally residue-free
Close
Multi Five 1640 Spray
Adhesives, Cleaning, Electrical, Electronic Solution, Miscellaneous, Multipurpose, Spray Solutions, Sprays and Resins, Weather Protection
General purpose spray. Provides excellent capillarity activities, lubricating, corrosion and cleaning properties, adhesion to metals and extreme low surface tension.
Close
NOVEC Electronic Grade Coatings
Safe, sustainable electronic grade coatings help protect your device components from
corrosion or your display surfaces from dirt, grime and fingerprints.
Whether you're looking to protect sensitive electronics against corrosion that will
shorten device life or give touchscreens and other surfaces an easy-to-clean and
smudge-resistant finish to help them look good and function properly — you can
depend on 3M™ Novec™ Electronic Grade Coatings.
Close
HS-51 SOLDERING STATION
- Speedy replacement of tips without requiring a tool.
- A setting lock feature is provided to secure the soldering temperature. This feature uses a password, and does not require a card or key.
- Features a sleep function (sleep sensitivity & time setting: 0 to 20°C & 0 to 999 minutes).
- Auto shut-off activated when a preset time elapses (setting range: 0 to 999 minutes).
- Station stacking is possible.
- Power cord：1.2 m
- Accessory: Soldering iron stand (tip cleaner)
Close
HS-802 DESOLDERING STATION
Specifications ■Power cord:1.8 m Rated voltage / frequency 100V AC, 50 / 60Hz Power consumption 170 W Heater Ceramic heater
Close
HS-401 HOT TWEEZERS
Specifications 3-pin plug type. Power cord: 1 m Accessory: Dedicated soldering iron stand Rated voltage / frequency 100 to 240
Close
SS-750LS DESOLDERING PUMP
Specifications Cylinder capacity mL OAL mm Weight g ESD standard Ω 15 216 34 Ground resistance Rg<1 × 1012
Close
11676
Details Item Number 11676 HP-Master Quickcrimper Part Comment HP-Master® Quickcrimper The stripped wire with sleeve can be crimped single-handed with
Close
Close
3M 1125 Tape Copper Foil with Acrylic Adhesive
Details 3M™ 1125 Tape consists of a 1-ounce rolled copper foil with an acrylic, pressure-sensitive adhesive. 1-ounce copper foil backing
Close
3M Aluminum Foil Tape 1115B
- Highly conformable with a conductive, acrylic adhesive
- Provides excellent EMI shielding effectiveness and has structural support properties
- Suitable for applications that require good electrical conductivity
- Tape measures 1 in x 36 yds x 6 mil
- Comes in silver color
- Withstands a wide temperature range of -40 to 266 degrees F (-40 to 130 degrees C)
- Comes on a removable liner for easy die-cutting and handling
- RoHS 2011/65/EU Compliant
Close
3M EMI Copper Foil Shielding Tape 1194
Details 3M™ Copper Foil Shielding Tape 1194 has a 1.4-mil smooth copper foil backing with a non-conductive acrylic pressure-sensitive adhesive
