3M Fire Barrier Moldable Putty MP+ Sticks
Designed to firestop a wide variety of through-penetrations, including cable, conduit, insulated pipe, and metal pipe.
- Pliable – can form into almost any desired shape
- Will not dry out or crumble – can be sealed for reuse
- Available in 36 x 152 mm and 36 x 279 mm stick sizes
3M Fire Barrier Pass-Through Devices
Re-enterable and caulk-free.
- Australian standard testing in accordance with AS1530.4, International testing in accordance with EN1366 and ASTM E814 (UL Listed)
- Provides up to a 4-hour integrity rating
- Stackable for penetrant versatility
- Hinged for easy retrofit installation around cables
- Sizes available in: Round 50.8 mm (2"), Round 101.6 mm (4"), Square 63.5 mm (2.5"), and Square 101.6 mm (4")
3M 425 Aluminium Foil Tape
Aluminum foil tape is a 5 mil nominal dead soft aluminum foil backing combined with a transparent acrylic adhesive designed to seal the cut edges of 3M Duct Wrap and Interim mats to complete the total encapsulation.
- 5-mil aluminum foil
- Acrylic adhesive
- Tensile strength: 30 lbs./in.
- width (525N/100 mm)
3M Interam E-5A-4 Mat
Resists heat and fire to protect structural steel and provide electrical circuit protection around cables, cable trays, and conduits.
- Hydrocarbons pool fire approved systems
- Endothermic – releases chemically bound water to cool the outer surface when exposed to high temperatures
- Made of a combination of ceramic fibres and inorganic endothermic material
- Easily cuts to size and flexible
- 10 mm thick x 62.23 cm width x 6.1 m length roll size
3M Interam Endothermic Mat
3M Fire Barrier Duct Wrap 615+
Manufactured with a man-made vitreous spun fiber, a calcium magnesium
silicate (CMS) wool technology which is bio-soluble, allowing for low thermal
transfer properties in a lightweight, low profile, easy to apply the product.
Lightweight 96 kg/m3 and thin 38 mm for easier application
Broadest and most economical tested duct hanging support system in the
industry
- Up to 2 hour fire protection tested to AS530.4
- Certified for grease ducts to ASTM E 2336 (including ASTM E 119 engulfment) in 2-layer systems
- Certified for ventilation ducts to ISO6944 in 1-layer systems and for other key life-safety duct applications
- Available in 38mm x 609 mm x 7.6m & 38mm x 1220 mm x 7.6m rolls
3M FireDam 240
Large electrical and mechanical through penetrations can be sealed to provide up to 4 hours fire rating using 3M™ FireDam™ 2000 Coating applied on mineral fiber board known as 3M FireDam™ 240 Coated Mineral Board. In the presence of heat or fire, the coating on top of 3M™ FireDam™ 240 intumesces (expands) up to 10 times, forming an insulating char which significantly slows any heat transfer. The expanding char fills voids,including those left by perishing materials.
3M Fire Barrier Moldable Putty MP+ Sticks & Pads
Designed to firestop a wide variety of through-penetrations, including cable, conduit, insulated pipe, and metal pipe.
- Pliable – can form into almost any desired shape
- Will not dry out or crumble – can be sealed for reuse
- Available in 3 mm thick pads:
- 102 x 203 mm, 178 x 178 mm and
- 241 x 241 mm sizes
Multi Five 1640 Spray
Special Contact Cleaner 1625 Spray
- Loosens dirt, light oxide layers, and impurities of every kind in
an effective gentle manner. - Electrically neutral and totally residue-free
Silicone Spray 1609 Spray
- General use product for preventative maintenance, protection
and lubrication. - Lubricates moving parts, without becoming resinous and can
be used over a wide temperature range (- 32 °C to + 177
°C) - Long lasting protection against moisture and corrosion.
Neutral towards paints, plastic, rubber, foamed materials,
wood and fabrics.
Zinc Spray 1617 Spray
- Provides permanent protection against rust and corrosion by
electrochemically bonding. - Excellent adhesion to iron and steel is resistant to weathering,
UV radiation, and moisture, heat up to 500°C, alkaline solutions
and mineral oils. - An ideal primer for metal constructions, and complies with DIN
50976 (zinc content) and DIN 53167 (corrosion protection).
Rust Remover 1633 Spray
A multi-purpose spray. It loosens rust, protects
against moisture and renewed oxidation, can be
used ideally as a lubricant, easily releases tightly
sealed bolts and has a high penetration capacity
Dehumidifier 1605 Spray
- Penetrates and displaces moisture. It also defrosts
frozen sections. - Completely neutral toward (paints, plastics, rubber and
fabrics). - It is effective over a wide temperature range
from - 74°C to + 175°C.
110kv(123kv) / 132kv (145kv) Splice
66kv/72.5kv Splice
110kv(123kv)/132kv (145kv) Termination
66kv/72.5kv Termination
3M CCI Tubes
3M BBI-A Busbar Sleeves
Get durable and reliable protection that helps prevent failures and downtime in applications from 5-25 kV. 3M™ Heat Shrinkable Bus Bar Tubing BBI-3A covers and insulates rectangular, square or round bus bars, and resists splitting and solvents.
905N
- Low Voltage (Automotive) Applications
- Maximum Insulation 0.110" (2.79 mm) Tap & 0.145" (3.68 mm) Run
- Wire Range 22-18 (0.5-1.0) Tap & 18-14 (0.75-1.5) Run
- Temperature 90*C (194*F)
905
- Low Voltage (Automotive) Applications
- Maximum Insulation 0.110" (2.79 mm) Tap & 0.145" (3.68 mm) Run
- Wire Range 22-18 (0.5-1.0) Tap & 18-14 (0.75-1.5) Run
- Temperature 90*C (194*F)
901
- Disconnect
- Maximum Insulation 0.145″ (3,68mm)
- Wire Range 18-16 (0,75-1,5)
- Temperature 90*C (194*F)
804
- Moisture Resistant Applications
- Flame Retardant
- Maximum Insulation 0.145″ (3,68mm)
- Wire Range 18-16 (0,75-1,5)
- Solid/Standard 14 standard
- Temperature 75*C (167*F)
