3M Thermally Conductive Silicone Interface Pad 5595
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
3M Thermally Conductive Silicone Interface Pad 5586
• Good softness and conformability even to non-flat surfaces
• Good thermal conductivity
• Good electrical insulation properties
• Compression relaxation properties reduces pressure to electric components
• Slight tack allows pre-assembly
• Good wettability for improved and lower thermal resistance
3M Heat Shrink Thin-Wall Tubing FP-301
3Mâ„¢ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a variety of industrial and military applications. FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow.
3M Thermally Conductive Silicone Interface Pad 5584
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base
- The product tack is such that a mechanical means to support the pad in a final assembly is required
CIRCUIT WORKS CONDUCTIVE GREASE CT40-5
- Â Heat Sink Grease silicone compound facilitates heat transfer away from electrical/electronic components.
- This heavy consistency material is thickened with a heat conductive metal oxide filler to maintain a positive heat sink seal in electrical/electronic equipment.
- Excellent thermal and dielectric properties
- Will not dry out, harden, or melt
- Noncorrosive and nonflammable
CIRCUIT WORKS CONDUCTIVE GREASE CW7270
- Â Exceeds MIL-C-47113 for thermal conductivity
- Â Noncorrosive
- Â High dielectric strength
- Â Low migration
- Â Stable from -15ï‚°C to 200ï‚°C
- Â Nonflammable
CIRCUIT WORKS CONDUCTIVE GREASE CW 7250
- Fills connector gaps to maximize electrical and thermal conductivity
- Maximum electrical conductivity and thermal conductivity
- Protects against moisture and corrosion
- Thermally stable over a wide temperature range
- Conductive lubricant containing pure silver
- Controls static discharge
- Grounds circuits
IDEAL GROUNDING RODUCTS
- Safe, fast and efficient for cost-effective grounding jobs
- Ensures compliance with Article 250 of the National Electric Code
- Various wire lengths allow for a solution for every job
- Thread-forming, hole-finding ground screw with combination Slotted, Phillips, Hex and #2 Robertson head
- Heavy-duty fork terminal available on stranded pigtails attach easily to the device grounding screw
CIRCUIT WORKS CONDUCTIVE GREASE CW7100KG
• Fills connector gaps to maximize electrical and
thermal conductivity
• Protects against moisture and corrosion
• Thermally stable from -70°F/-57°C to
485°F/252°C
• Conductive lubricant containing pure silver
• Controls static discharge
• Grounds circuits
CIRCUIT WORKS CONDUCTIVE GREASE CW7100
- High electrical conductivity
- Excellent thermal conductivity
- Provides protection against wear
- Remains stable in a wide temperature range; 70 to 485°F ( 57 to 252°C)
- Protects against moisture and corrosion
- Very low viscosity vs temperature change
Bubble Wrap Pouches
- W x L:Â 6" x 8"
- Weight:Â 7.3 lbs
- Qty/Case:Â 250
3M Thermally Conductive Grease TCG-2035
- High Performance thermal interface material
- Good bulk conductivity
- Excellent thermal impedance
- < 40 μ max particle diameter
- Non-silicone material
- Thin interface to offer low thermal resistance
- Good wet-out
IDEAL INSURE PUCH IN
The In-Sure® push-in wire connector can reduce installation time by up to 50% compared to more traditional connection methods such as terminal blocks. In-Sure® connectors are the perfect replacement for crimped splices. In addition the most popular 2, 3 & 4 port models are rated to 32 Amps.
Chemtronics Silver Conductive Adhesive Epoxy CW2500
- Conveniently-packaged epoxy system that provides a tough, thermally stable, epoxy protective conformal coating.
- Provides a hard, durable, protective green coating
- Excellent dielectric properties; help prevent electrical discharge
- Protects against moisture and abrasion
- Ideal for pre-reflow solder resist repair
- Service temperature from -55°F/-48°C to 600°F/315°C
- Meets the requirements of IPC-7721, 2.4.1
- Ideal for repairing permanent solder mask before reflow applications
- Protects circuits and prevents shorting and arcing
Chemtronics Silver Conductive Adhesive Epoxy CW2460
- Conductive Silver Epoxy Provides Excellent Electrical and Thermal Conductivity
- Fully Cured Material Offers High Strength Bonds
- Extended Pot Life Provides Sixty Minute Work Time
- High-Strength Solderless Conductive Bonding
- Repairs Defective Traces and Creates Jumpers on Boards
- Quick Solderless Electronic Connections
IDEAL SPLICE LINE WIRE CONNECTORS
- A faster alternative to traditional butt splices
- Crimp-free, solderless push-in butt splice
- Slim design fits through 1/2 in. knockout
- Perfect for lengthening wire
- Transparent polycarbonate housing for visual inspection of connection
- Approved for bonding and grounding applications
Chemtronics Silver Conductive Adhesive Epoxy CW2400
- Quick solderless electronic connections
- High strength conductive bonding
- Ideal for bonding surface mount connections, track repair, die attach, static discharge and grounding
- Bonds a wide variety of materials including solder alloys, aluminium, copper and glass
- Compatible with Circuit Works® Conductive and Overcoat pens
- Cure time: 24 Hrs @ 25°C
IDEAL POWER PLUG DISCONNECTS
- Makes replacing ballasts in lighting fixtures easy
- Meets UL and CSA finger-probe safety requirements
- Available in 2 and 3 pole
3M Epoxy Bonding Adhesive EG-2P-3005
- Fast setting, flexible epoxy adhesive
3M Scotchlok 972-A
The 3M Scotchlok tap connector is sold 1000 per case and is another quality product from 3M. Supported wire size is 18 AWG to 14 AWG. The maximum outside diameter of the insulation this tap connector can work with is 0.15 in. Among all the other aspects of this product, it offers the following resistant properties: chemical-resistant. This tap connector meets the following standards: CSA LR15503.
3M Thermally Conductive Epoxy Adhesive TC-2810
- High adhesive strength
- Slight tack allows pre-assembly
- Good surface wet out
- Low viscosity for potting application
- Good gap filling
- Thin bonding line
- Good thermal conductivity (1.0-1.4 W/m-K)
- Low CL ion content and outgassing
3M Scotchlok yellow IDC 953K
The 3M Scotchlok yellow IDC is sold 1000 per case and is another quality product from 3M. The maximum supported wire size is 12 awg. The maximum outside diameter of the insulation this IDC can work with is 0.15 in.
3M Novec 73DE Engineered Fluid
- Designed for use in vapor degreasers and immersion cleaning
- Cost-effective replacement for nPB, TCE, ozone-depleting HCFCs and high GWP HFCs
- Excellent performance with high solvency and low surface tension
- Effective in cleaning heavy greases, oils, waxes, silicones and non-polar flux residues
- Easy to maintain and use in a vapor degreaser with stable bath composition during extended use
- Non-flammable with an excellent safety profile
- Environmentally sustainable with low global warming potential (GWP) and zero ozone depletion potential (ODP)
- Faster cycle times, lower energy usage and improved cleaning of parts compared to aqueous cleaning
- Effective for lubricant deposition applications where increased solvency is desired
