Close
Anti-corrosion Spray
1600 Spray (400ml)
- Highly effective anti-corrosion protection.
- Protects against moisture, spray salt water, all corrosive media.
Close
Clear Insulating Paint
1601/2/3/4 Spray (400 ml)
- Marking 1601 = Transparent
1602 = Red
1603 = Black
1604 = Grey
- Clear insulating and covering paint based on alkyd resin.
- It “hardens” into a flexible and resistant film, with excellent adhesion to most common surfaces.
- UV-rays, acids, oil and alkalis, it is moisture and weatherproof and is especially characterized by its high dielectric strength.
Close
Degreasing and Cleaning Spray
1626 Spray (400 ml)
- An ideal dissolving cleaner for greases, oils,
lubricants, resins and tar. It is residue- free, noncorroding
and washes away asbestos. (May corrode
plastics).
Close
Dehumidifier 1605 Spray
- Penetrates and displaces moisture. It also defrosts
frozen sections. - Completely neutral toward (paints, plastics, rubber and
fabrics). - It is effective over a wide temperature range
from - 74°C to + 175°C.
Close
Rust Remover 1633 Spray
A multi-purpose spray. It loosens rust, protects
against moisture and renewed oxidation, can be
used ideally as a lubricant, easily releases tightly
sealed bolts and has a high penetration capacity
Close
Zinc Spray 1617 Spray
- Provides permanent protection against rust and corrosion by
electrochemically bonding. - Excellent adhesion to iron and steel is resistant to weathering,
UV radiation, and moisture, heat up to 500°C, alkaline solutions
and mineral oils. - An ideal primer for metal constructions, and complies with DIN
50976 (zinc content) and DIN 53167 (corrosion protection).
Close
Silicone Spray 1609 Spray
- General use product for preventative maintenance, protection
and lubrication. - Lubricates moving parts, without becoming resinous and can
be used over a wide temperature range (- 32 °C to + 177
°C) - Long lasting protection against moisture and corrosion.
Neutral towards paints, plastic, rubber, foamed materials,
wood and fabrics.
Close
Special Contact Cleaner 1625 Spray
Cleaning, Electrical, Electronic Solution, Spray Solutions, Sprays, Sprays, Sprays and Resins, Weather Protection
- Loosens dirt, light oxide layers, and impurities of every kind in
an effective gentle manner. - Electrically neutral and totally residue-free
Close
Multi Five 1640 Spray
Adhesives, Cleaning, Electrical, Electronic Solution, Miscellaneous, Multipurpose, Spray Solutions, Sprays and Resins, Weather Protection
General purpose spray. Provides excellent capillarity activities, lubricating, corrosion and cleaning properties, adhesion to metals and extreme low surface tension.
Close
3M Heavy Duty 20 Spray Adhesive
- Provides professional, industrial strength for demanding applications at an economical price
- Comes with a lace spray pattern for improved accuracy
- Includes a versatile adhesive that bonds a wide range of lightweight materials
- Offers a low tack for immediate repositioning
- Bonds paper, cardboard, fabric, insulation, plastic, metal, wood and more
- Allows for a bond time of 15 seconds to 30 minutes
Close
3M Foam & Fabric 24 Spray
| Brand Name | 3M |
|---|---|
| EAN | 0051111078624 |
| Manufacturer Series Number | 24 |
| Model Number | DAS-24SPRAY |
| Part Number | 051111078624 |
| UNSPSC Code | 31201600 |
| UPC | 051111078624 |
Close
3M Multi-Purpose 27 Spray
- Quickly bonds paper, cardboard, plastic films, soft foams and fiberglass insulation
- Fast tack helps eliminate dry time
- Mist spray pattern helps ensure better coverage
- Extended bond time helps reduce waste and keep assembly lines moving
- Portable, easy to use and requires no additional equipment
Close
3M Scotch-Weld Spray 80
- 3M™ Scotch-Weld™ 80 is a high performance plasticiser resistant neoprene contact adhesive.
- It features the high strength performance normally associated with bulk sprayable and brushable contact adhesives.
- The good plasticiser resistance plus the ability to produce high strength heat resistant bonds to most substrates makes Spray 80 ideal for many demanding jobs.
- High temperature resistance - up to 93°C.
- Fast drying, fast bonding. Low misting precise spray.
Close
3M Hi-Tack 76 Spray Adhesive
- High-tack spray adhesive creates strong bonds
- Fast-tacking adhesive bonds quickly
- Variable-width lace spray pattern minimizes waste and overspray
- Low-misting property allows for precise spray control
Close
3M Hi-Strength 90 Spray Adhesive
- Provides professional, industrial strength for demanding applications
- Comes with a variable-width web spray pattern
- High strength, fast, contact type adhesive
- Bonds laminate, wood, concrete, metal, plastic and more
- High temperature and moisture resistance
Close
3M HoldFast 70 Spray Adhesive
- Versatile adhesive ideal for construction sites
- Creates quick bonds for temporary and permanent needs
- Very fast-tacking adhesive bonds almost immediately and has a long bonding range
- Portable container provides a spray pattern with low soak-in and no overspray
- Bonds polystyrene without damaging the material or degrading the surface
Close
3M Polystyrene Insulation 78
- Designed specifically for bonding expanding polystyrene foams (EPS)
- Forms a bond stronger than the polystyrene foam
- Will not dissolve or degrade polystyrene
- Sprays with a lace pattern optimized for foam bonding
- Provides professional, industrial strength adhesive for demanding applications
- Allows for a bond time of one to 30 minutes
Close
3M Foam Fast 74 Spray Adhesive
- Designed specifically for foams and fabrics
- Dispenses with a lace-spray pattern optimized for foam bonding
- Provides professional, industrial strength for demanding applications
- Offers a fast, aggressive tack for a quick assembly of high-stress bonds
- Allows for a bond time of 15 seconds to 30 minutes
Close
3M 77 Super Multipurpose Adhesive Aerosol
- High coverage and aggressive tack
- Bonds quickly in 15 seconds
- General industrial, packaging, infusion moulding, dry lay-up, dry wall, wood working, furniture, specialty vehicles, marine and heating ventilation and air condition (HVAC)
- Fast, aggressive tack and low soak-in eliminates clamping and dry time
Close
3M Hi-Strength Postforming 94 CA Adhesive
- Provides a longer open time and more aggressive tack than comparable adhesives
- Permits immediate repositioning while providing long-lasting strength
- Ideal for applications involving large surfaces
- GREENGUARD™ certified
- Available in cylinder or bulk packaging
Close
3M Repositionable 75 Spray Adhesive
- Hold emblems and badges during stitching
- Fixture lightweight materials
- Hold T-shirts during silk screening
- Temporarily hold paper masking in place
- Finger-touch, targeted control ensures minimal overspray, waste, and cleanup
- Low soak-in formula allows it to bond delicate substrates without damaging the material
- Adhesive remains tacky to allow materials to be repositioned repeatedly
- Formula resists bleeding, staining for reliable and effective performance
- Dries clear, produces a smooth glue line and resists wrinkling on most materials to produce a clean appearance
Close
3M Industrial Cleaners and Adhesive Removers
- Removes grease, oil, ink and most adhesives without the need to soak
- Provides mold-release agents
- Removes adhesive without damaging the surface underneath
- Optional California-compliant formulas
- Contains no chlorinated substance
Close
SILICONI ZINCOSIL 400
- Elevated covering power, it forms a film of about 30 microns with one spray
- Good resistance to oxidation (it resists for a lot of time to salty fog test)
- It forms an elastic film that sticks on any surface protecting it from oxidation
- It has a clear tonality very similar to heat galvanization
- It dries quickly (3 minutes in surface) and it does not drip
- It can be overpainted or left as a final protection
- High resistance to abrasion
Close
SILICONI ZINCO 98
- Elevated covering power, it forms a film of about 50/70 microns.
- Good resistance to oxidation. (it resists for a lot of hours to salty fog tests).
- It forms an elastic film that sticks on any surface protecting it from oxidation.
- It has a very dark tonality.
- It dries quickly (in about 6/7 minutes in surface) and it does not drip.
- It can be overpainted or left as final protection.
