T8202 Vibration
- Auto power off
- Magnetic probe
- Sensing probe
T4201 Anemometer
Features
- Low friction
- Ball bearing design
- High accuracy
- Data hold
- Indicates in 4 different
- speed units
T3004 Humidity / Temperature
Features
- Data hold
- Min/max
- REL function
- Auto power off
T325 Sound Level
- Type 2 sound level meter
- Wide range
- Sampling rate 2 seconds
- Bargraph
- Min/max hold
- Frequency weighting A/C
- Over range indications
T2000 Earth Resistance Clamp
- Jaw Size 32mm
- 99 Memory locations
- Resistance measurement on earth probes by means of ground loop method
- Direct measurement on earth probes without any cable breaking
- Measurement of leakage current on earth installations
- The setting of alarm thresholds on measurements
- Storage of measurement results
- Detection of current noise on measurements
- Data HOLD function
- Backlit
T223 100A AC/DC
Automotive
•Jaw size 12.5mm
•Concurrent reading
•Resistance
•Continuity
THT47 Thermal Imager
T77N AC Earth Leakage
•Jaw Size 40mm
•High accuracy with no interference
•Data hold
•Auto power off
•Low pass filter with high stability
•Autorange
•Bargraph
•Auto backlit sensor
•Frequency compare function
TBM3030 600A AC
Features
- Jaw size 26mm
- Large LCD display
- Diode
- Continuity
- Relative zero
- Data hold
T887 3 phase Rotation LCD Indicator
- Colour coded red/white/blue
- Large alligator clips
- Indicates phase rotation and phase presence
T860 3 phase & Motor Rotation indicator
- Determine rotation of unconnected motors
- Heavy duty alligator clips
- Open phase identification
T855 3 phase Rotation Indicator
• Fused test leads
• Rotating disc
• Colour coded red/white/blue
• Large alligator clips
T890 Safety 3 phase Detector (Non contact)
Clamps over wire insulation without contact on conductor
• Auto off
• Non contact sensor clips
• Open phase and phase sequence
• Magnets on back of unit to mount on metal surfaces
T685 High Temperature Non-contact Thermometer
T111 Non-contact Thermometer
- Temperature : ± 2°C/4°F for -30°C 100°C and ± 2% for 101 °C550°C
- Operating Temp : 0°C 50°C
T306 Non-contact Thermometer
The temperature range is from -50°C to 700°C.
Special feature includes adjustable emissivity from 0.1 to 1.0. Max hold, large backlit LCD display, High and Low alarm and a trigger lock for continuous use.
CMM-10
The most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
CMM-40
-
AC/DC voltage
-
AC/DC current
-
resistance
-
capacitance frequency
-
duty cycle
-
temperature
-
testing diodes
-
continuity
VT-2
The Non-contact AC Voltage Testers are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety, personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
P-2
P-2 Voltage and continuity tester functionality includes:
- AC/DC voltage measurement and an indication
- Resistance measurement and circuit continuity testing
- An indication of phase rotation
- Single pole testing for phase detection
- RCD testing
CMP-1006
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
CMP-400,CMP-401
CMP-2000
Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
The instrument has an electronic overload protection of all functions and ranges.
CMP-600
- AC and DC current measurement (TRUE RMS) up to 600A.
- AC and DC voltage measurement (TRUE RMS) up to 600V.
- Acoustic signalling programmable for instances of exceeding the MAX/MIN values set.
- Resistance measurement and continuity test:
- continuity test with acoustic signalling (for resistance below 1000). - Frequency measurement.
- Diode test.
- Wireless cooperation with many transmitters.
- CMP-600R compatible with a computer via a USB interface. Software provided.
- The comfortable case for the meter and accessories.
