3M 525W
- Ambient temperature curing
- Convenient to use
- Good insulation
- Excellent UV resistance
- Outstanding flexibility
- Good heating resistance
- Good flame retardant performance
YONYU WIRING DUCTS-PLASTIC, DECORATION, TELEPHONE, SOLID,ROUND
3M Scotchcast Flexible Power Cable Inline Splicing Kits 82-F Series
- 3M™ Scotchcast™ Flexible Power Cable Inline Splice Kit 82-F Series is a series of flexible inline splices for use on non-shielded portable power cables and cords.
- The kits are rated up to 5 kV for single conductor and up to 1 kV for multiple conductors.
3M TERMINAL PROTECTOR TP-500 IN 6.6kV (UE)/11kV
- XLPE type LT/HT Heat Shrinable Joiting kits
- Voltage : 1.1kV/11kV/22kV/33kV with CPRI Type Test Report.
3M TemflexTM 1600 Vinyl Electrical Tape
3M Temflex 1600 Electrical Tape is a good quality and economical general purpose vinyl insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has a high wet dielectric strength, is comformable and provides excellent mechanical protection with minimum bulk. Temflex 1600 meets the requirements of BS 3924.
Scotch Linerless Rubber Splicing Tape 130C
- Highly conformable, rubber-resin adhesive and the self-fusing, ethylene propylene, rubber backing provides UV resistance
- Excellent electrical and mechanical properties offer a moisture seal and void-free buildups
- Suitable for splicing and terminating cables and wires
- Provides an excellent thermal dissipation of splice heat
- Tensile strength rating of 17 lbs. per inch meets professional electrical standards
- Comes in black color
- Withstands temperatures up to 194 degrees F (90 degrees C)
- ASTM Approved and RoHS 2011/65/EU Compliant
Yonyu Cable Gland
Cable glands can be applied in any industries which use cables, including aerospace, marine, telecommunications, railway, machine and apparatus construction.
YY provide cable glands with complete range and stable quality.
With special design, YY cable glands provide easier assembling and tighter installation.
3M TufQUIN Hybrid Insulating Paper Laminates
3M™ TufQUIN Hybrid Insulating Paper Laminates consist of 2 or 3 layers of TufQUIN paper bonded with a polyester film. With stiffness and formability, the insulation is suitable for use in motors and generators as well as dry-type transformers. Available from 3 to 29-mil (.076 to .74mm) thickness, TufQUIN laminates are optimal solutions for much major insulation rated through Class 200(N).
3M CeQuin
3M™ CeQUIN™ 3000 paper is composed of approximately 74% inorganic content as compared to the 90% inorganic content of CeQUIN I paper. CeQUIN 3000 paper may be laminated with polyester film, or glass fabric to enhance initial dielectric strength or improve mechanical manageability. CeQUIN 3000 paper is available in continuous roll stock up to 36 inches wide, as slit tape, or sheets.
3M EMS(Locator Marker)
- Pre-set auxiliary frequencies for power, CATV, radio and long haul fiber applications.
- Directional peak, directional null, single peak locate modes.
- Large backlight, high resolution, graphic display.
- Push-button cable/pipe depth readout with continuous depth measurement mode.
- Large backlit, high-resolution graphic display
- PC interface via standard RS232/USB
- User-configurable features and interface
- Detects all seven EMS marker frequencies
- Locator PC tools software
- iD marker read/write capability
- Dual marker frequency search-simultaneous
- iD Marker depth estimation
3M ThermaVolt AR Calendered Inorganic Insulating Paper
3M™ ThermaVolt AR Calendered Inorganic Insulating Paper combines the excellent thermal conductivity and voltage endurance of inorganic insulation plus the strong mechanical and thermal properties of aramid insulation. Available from 3 to 30-mil (.076 to .76mm) thickness, ThermaVolt AR paper is a high-performance solution for major insulation applications rated through Class 220(R).
3M Thin Wall Heat Shrink Halogen Free
- Ideal for cable marking and identification applications
- Used in electronics, communication and transportation industries where it is necessary to limit toxic gases emitted in a fire.
- Halogen free; low toxic
3M Heat Shrink Thin-Wall Tubing FP-301
3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a variety of industrial and military applications. FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow.
3M Fire Dam 2000 Coating
- Good adhesion to most surfaces
- Up to 4 hours fire rating for penetration
- Applied using common trade tools, Spray, trowel or brush
3M Anti Rodent Repellent Spray
- Keeps away rodents/Mice
- Repellant Coating
- Automotive usages
3M Armorcast Structural Material 4560-15
- Flexible fiberglass knit fabric strip, saturated with a curable black urethane resin syrup that starts to cure after adding water
- Once wet, the fiber strip becomes tacky and sticks to itself
- Compatible with coaxial, copper, fiber cables, polyethylene or lead-sheathed cable, pressurized and non-pressurized cable
- Creates an airtight, permanent bond when combined with vinyl mastic VM tape and vinyl tape 50
- Suitable for aerial, buried and manhole applications
- Ideal for strengthening old cables, splices and auxiliary seals
- Fast and easy to apply, yet hardens to a strong and maintenance-free coating
- RoHS 2011/65/EU Compliant
- 5/bulk pack
- It works for sheath repairs, trouble openings, 90(deg) bends, long length repairs, and T-zone damage
- Can be used on pressurized or nonpressurized cable and on either polyethylene or leadsheathed cable
- Perfect for sheath repair, trouble openings in poly cable, and T-zone repair
3M High Voltage Cold Shrink Termination Kit 110kv(123kv)/132kv(145kv)
- Light weight
- Dry design - does not require liquid dielectric
- Can be installed at any angle or inverted
- No special maintenance required
- Top - and bottom - sealing system based on proven cold shrink technology
- Alternating sheds (skirts)
- One-piece factory-tested push-on termination body
3M High Voltage Cold Shrink Termination 66kv/72.5kv
- The versatile design of the silicone cold shrink Termination body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C.
- No heat, flame, or special tools are needed during splice body installation.
- Accommodates crimp or mechanical Lugs up to 110mm in diameter.
- Wide application range covering several cable cross sectional areas from 120mm² – 2000mm².
- Solderless earth connection to copper screen wires or lead sheath.
- Silicone rubber Cold Shrink outer rain sheds and sealing PST’s provide physical protection and moisture sealing of the completed Termination. Datasheet Page 2 of 3 Issue 7
- The Silicone outer rain sheds of the Termination makes it ideal for zones with maximum environmental contamination, industrial or coastal.
- Creepage path connection for additional protection in areas of high pollution.
3M Cold Shrink Cable Jointing Kits, 11KV/22KV/33KV
- One part joint body
- 100% tested after manufacture
- No heat required
- Tool free installation
- Permanent radial pressure
- Suitable for paper and polymeric cables
- Compatible with compression and mechanical connectors
- Low temperature installation
- Provides consistent installation quality
