Close
Close
Hunter 870 Pre-Heater / Hot Plate
- Special Heater to provide even heat on surface
- Precise and Reliable Temperature
- Close-Loop of Sensors, provide accurate and stable temperature
- Applicable to Reflow and Per-heat for PCBs
Close
Hunter 885 Heating Gun
- Wide Range of Temperature and Air Volume control
- Produce Cold Air to extend the heater life span and the unit
- Suitable for all kinds of Soldering and De-soldering
Close
Hunter 886 ESD 2 in 1 Lead Free Rework Station
Power Consumption : 320W Dimension ( L x W x H ) : 252 x 225 x 155 mm Weight
Close
Hunter 939 Handheld ESD Vacuum Pen Set
- Able lift objective up to 50g
- Come with 3 different nozzles
Close
Hunter 967 / 969 ESD Soldering Station
- Compact in Size, Light Weight
- For gentle soldering purposes
- Analog / Digital Display Mode
- ESD Safe by Design
Close
Hunter 982B Liquid Dispenser
- Dispense accurate dosage per volume required
- Timing injection controlled by Timer
- No waste on materials and user friendly
- Auto and manual mode available
Close
Hunter 989 ESD Hot Tweezers
- Available for Hunter 967 / 969 Soldering station
- Direct Heating with less influence on the surrounding components
Close
Hunter Common Point Grounding Box / Cord / Point
Specification for Common Point Grounding Box: 2 point come with 10mm Stud Wire Length : Approx. 1.5m Specification for
Close
Hunter Cord / Cordless Wrist Strap
- Safe and Reliable
- Adjustable / Replaceable Strap
- Suitable for Clean Room Environment
Close
HUNTER D110 P SOLDERING IRON
| Power Consumption | : 110W |
| Temperature Range | : 200°C ~ 500°C |
| Temperature Rising | : 8 sec. ( 25°C to 500°C ) |
| Power Input | : AC 85V to 260V ( 50/60Hz ) |
| Temperature Stability | : ±2°C |
| Tip to Ground Resistance | : < 2Ω |
| Tip to Ground Potential | : < 2mV |
Close
Hunter DE-101 / DE-101E Hygro-Thermometer
- Jumbo Display for easy reading
- To Display Time, Humidity and Temperature
- Maximum and Minimum Reading Memory
- °C / °F Exchangable
- For In-door (DE-101) and Out-door (DE-101E) Temperature Reading
Close
HUNTER DE-250 / DE-256 / DE-256C / DE-257 / DE-258E Cutter
- Different cutter size to suit your production requirement
- Cutting capabilities up to 1.6mm Copper Wire
- Recommend to cut copper and soft lead wires
Close
Hunter ESD Brushes
ESD Brushes |
||||||||
| Model | DE-200A | DE-200B | DE-200C | DE-200D | DE-200E | DE-200F | DE-200G | DE-200H |
| Material | Nylon | Wool | Nylon | |||||
| Handle Length (mm) | 165 | 180 | 227 | 245 | 215 | 205 | 148 | 148 |
| Bristle Trim Length (mm) | 30.0 | 16.0 | 20.0 | 22.0 | 60.0 | 55.0 | 23 | 27 |
| Bristle Length & Width (mm) | 15x3 | 33x9 | 70x15 | 110x18 | 70 x 12 | 48x15 | 37x6 | 35x6 |
| Surface Resistivity (Bristle) | 107Ω - 1010 Ω | |||||||
Close
HUNTER Tweezers
- The Hunter tweezers is made of stainless steel.
- This Hunter tweezers is sterile.
- This Hunter tweezers sold individually.
Close
Ideal 45-605 PrePro COAX/UTP Cable Stripper
- 1/4" x 1/4" industry standard coax preparation strip lengths
- Works on RG-6/RG-6 Quad/RG-59/RG-59 Quad/RG-6 Plenum coax cables
- Includes Coax (gray) and UTP/STP (blue) cartridges
- Supportive spring loaded force for consistent cutting depths
- Interchangable/Replaceable blade cartridges
- Compact design saves tool pouch space
- Recommended prep tool for ALL IDEAL RG6/59 series compression products
Close
IDEAL 61-340
Features
- AC/DC voltage
- AC/DC current
- Resistance
- Audible continuity
- Temperature
- Relative mode
- Backlight
- Low battery indication
- Auto power off
- CAT III - 600V
- 2-year warranty
Close
IDEAL 7IN 1 STRIPPER
- Reams and deburrs conduit
- Cuts screws and reforms threads on 4-40, 6-32, 8-32, 10-32, and 10-24
- Crimps bare and insulated terminals for no.10 to no.22 AWG wire
- Strips no.8 to no.16 AWG solid and no.8 to no.18 AWG stranded wire
Close
IDEAL BNC RG59
Installing one-piece compression BNC and right angle connectors just got easier. No more uncertainty when inserting the cable into the connector. No more collapsed centre pins. No more wasted connectors and rework time on the job.
Close
IDEAL BNC RG59 Compression Connector
- Nickel-Plated
- Brass Construction For Superior Corrosion Resistance
- Moisture-Inhibiting Design
- Approved For Indoor And Outdoor Use
Close
IDEAL BNC RG6
Installing one-piece compression BNC and right angle connectors just got easier. No more uncertainty when inserting the cable into the connector. No more collapsed centre pins. No more wasted connectors and rework time on the job.
Close
IDEAL BNC RG6 Compression Connector
- Nickel-Plated
- Brass Construction For Superior Corrosion Resistance
- Moisture-Inhibiting Design
- Approved For Indoor And Outdoor Use
Close
IDEAL CABLE CUTTERS
- Cable Cutter is designed to cut 750 KCMIL (MCM) and smaller hard-drawn copper and aluminum cables
- Hardened steel blades ensure consistent cuts and long-term durability
- Rounded blade design minimizes cable distortion during cutting
- Quick release mechanism simplifies blade back-out
- Molded-in foot provides stability and leverage when making multiple cuts
Close
IDEAL CABLE RIPPER
- Imported
- TWISTING: Plug a wing nut (not included) into this system and you’ll be able to get an easy grip to connect wires together
- CONDUCTOR HOOKING: Indents on the tool allow you to loop conductors to fit around grounding screws
- STRIPPING GAUGE lets you see how much length you are stripping off of your wire for precise measurements
- IDEAL FOR NM CABLE: An internal hook inside the ripper latches onto the jackets of NM cable, letting you drag the tool across and make neat rips
- “V” NOTCHED BLADE efficiently strips wire or cable without having to resort to other tools. With this, you’ll get a consistent cut every time
