3M™ Extreme Sealing Tape 4412N
- Bonds to many metals and plastics without drying time, dripping, oozing and require no clean-up
- No sticky mess
- Fastens to contours, edges, rivets and screw heads for a water tight seal with ease
- No caulking guns and empty cartridges
- Easy to paint and color blends to the adjoining surfaces
- Aesthetically precise and neat
- Withstands harsh environmental conditions - sun, rain, snow, temperature extremes and abrasion
- Flexibility allows for enduring vibration and thermal expansion/contraction
- No cracks or crumbles
- Bonds to many metals and plastics without drying time, dripping, oozing and require no clean-up
- No sticky mess
- Fastens to contours, edges, rivets and screw heads for a water tight seal with ease
- No caulking guns and empty cartridges
- Easy to paint and color blends to the adjoining surfaces
- Aesthetically precise and neat
- Withstands harsh environmental conditions - sun, rain, snow, temperature extremes and abrasion
- Flexibility allows for enduring vibration and thermal expansion/contraction
- No cracks or crumbles
3M™ Fasara Glass Decorative Films
- Installation on site. No need to remove the glass/window.
- Design flexibility.
- Reduces glare while blocking out 99% of UV light.
- Easy to clean.
- Cost-savings quality graphics.
3M™ Fluorinert™ Heat Transfer Fluids
3M™ Novec™ Engineered Fluids and 3M™ Fluorinert™ Electronic Liquids are compatible with
a wide variety of materials used in heat transfer equipment. As with any design, selection of these
materials is very important. Our tech support can help you make the proper choice.
Polymers
Most of the materials commonly considered “hard” plastics will perform well with both Novec
fluids and Fluorinert liquids.
Elastomers
Elastomers should be limited to those that are not heavily plasticized. 3M engineers can assist
you with recommendations and testing on specific compounds.
3M™ M-2001
- For use on most non-aggressive liquids.
- Designed to cover large surfaces.
- Rolls may be easily cut to fit tight corners.
- Perfect for lining drawers, covering workbenches, or masking areas from mists and oversprays
3M™ Micro-Klean™ RB Series Filter
Amine Sweetening, Completion & Workover Fluids, Hydrotreater Feed, Raw Material, Intermediates, & Feed Stream Filtration, Trade Paint Filtration, Water Injection for Enhanced Oil Recovery
Brand - Micro-Klean™
Diameter - 2.59 Inch
Diameter (Metric) - 6.6 Centimeter
End Modification - None
Filter Material - Acrylic Fibers, Phenolic Resin, Cellulose Fibers, Melamine Resin, Cellulose Fibers, Phenolic Resin, Cellulose/Glass Fibers, Melamine Resin
Filter Type Depth Filter
Formulation - A3, A8, B3, B8, F3, F8, L3, L8, Q8, V8, W8, x8, Y8
Industries - Industrial
Length - 10 Inch, 9.75 Inch
Length (Metric) - 24.8 Centimeter, 25.4 Centimeter
Series Micro-Klean™ RB Series
3M™ Novec™ 1700 Electronic Grade Coating
- Easy application and processing - dries in seconds without the need for thermal post-curing
- Requires little or no masking
- Allows solder-through repairability and is easily removed for rework & repair
- Contains no volatile organic compounds (VOCs) and has low global warming potential
- Is thermally and electrically stable with excellent dielectric properties
- Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
3M™ Novec™ Contact Cleaner
- Ideal for use on energized components
- Plastic compatible
- Used for removal of fluorinated oils and greases, light oils and silicones,
dust and particulates from sensitive electrical and electronic equipment - Meets MIL-PRF 29608A (Class C)
3M™ Oil Sorbent Roll T-100
- Hydrophobic
- Cost-effective as oil, not water, is recovered
- Can be used outside as well as in-plant
3M™ P-F2001
- For use on most aggressive (hazardous) and non-aggressive liquids.
- Four Sorbents in one - use as a boom, pillow, pad, or roll.
- Perforations every 16" allow you to select the length desired.
- Each perforated sheet unfolds to approximately 18" x 16"
- 5 inches X 50 feet (10.5 gallons/50 foot section).
3M™ Safety & Security Window Films
- Severe Weather Protection: Minimize flying glass due to violent weather events.
- Crime Prevention: Impede the quick access that smash-and-grab thieves are looking for.
- Bomb Blast Protection: Hold broken panes in place to help prevent flying shards of glass.
- Available in clear safety film or with a tinted sun control option.
- Graffiti Management: Save money when you replace only the window film that was vandalized instead of the
expensive glass beneath the film
3M™ Scotchkote™ Liquid Epoxy Coating 323
It can be used as a patch material, girthweld coating, a stand-alone coating for pipeline rehabilitation, and in a wide variety of other field applications where corrosion protection coatings of metal are required
3M™ Thermally Conductive Adhesive Transfer Tape 8805
Electronic Solution, Electronic Tapes, Tapes, Thermal Conductive Materials, Thermal Tapes, Thermal Tapes
- High mechanical strength
- Improved surface wet-out for rough surface/LSE substrates
- Excellent shock performance
- Wider and longer roll is available
- Halogen free
- Ideal for thin bonding applications
- Good thermal transfer
3M™ TSK 15 Kit
This kit contains :
- 25 Sheets - 48 cm x 43 cm
- 2 Minibooms - 18 cm x 38 cm 1 Disposal bag and tie
- 1 Disposal guide and label absorbency per kit 15 litres
3M™ TSK 30 Kit
This kit contains
- 50 sheets - 48cm x 43cm
- 2 minibooms - 7.5cm 1.2cm
- 1 disposal bag and tie
- 1 disposal guide and label
- Absorbency per kit: 30 Litres
3M™ Twin Axial Cable, SL8800 Series
- High-performance computing clusters
- Data center networks
- IB and GigE switches and routers
- Storage, server, RAID and HBA application
3M™ Writing Surface Films
Convert walls, tabletops, glass or any hard surface into a writing surface with 3M writing films. These films come in plain writing, writing
plus projectable and custom cut/template versions. Ease of application and removability give this film an edge over conventional
solutions.
5 Layer Flexible Packing
- Flawless finish
- Moisture-proof
- High strength
557*
- Dual Element Connection
- Flame Retardant
- Maximum Insulation 0.155″ (3,94)
- Wire Range 22-16 (0,5-1,5)
- Temperature 105*C (221*F)
558*
Connectors, Connectors, Connectors and Cable ties, Electrical, IDCS, Scotchlok™ Run & Tap Connectors
- Flame Retardant
- Maximum Insulation 0.155″ (3,94)
- Wire Range 22-16 (0,5-1,5)
- Temperature 105*C (221*F)
560
Connectors, Connectors, Connectors and Cable ties, Electrical, IDCS, Scotchlok™ Run & Tap Connectors
- Flame Retardant
- Maximum Insulation 0.145″ (3,68mm)
- Wire Range 18-16 (0,75-1,5)
- Solid/Standard 14 standard
- Temperature 105*C (221*F)














































