Close
3M Scotchcast Electrical Resin 9
- 3M™ Scotchcast™ Electrical Resin 9 is an easy-to-use resin system possessing medium viscosity and unique handling properties.
- High adhesion, low stress and low exotherm also reduce the effect of strain and temperature on sensitive components that have been coated with this resin.
Close
3M Scotchcast Electrical Resin MR283
- Not for specifications. Values are typical, not to be considered minimum or maximum.
- Properties measured at room temperature 73°F (23°C) unless otherwise stated.
- Physical Properties * Typical Value US units (metric) Hardness (Shore D
- ) 80 Specific Gravity (cured)3 1.55
- Compressive Strength6 10%
- Compression 5500 psi @ 10% (38.,7 kg/cm2 )
- Tensile Strength2 Ultimate 3700 psi (260,1 kg/cm2 )
- Elongation (% at break)5 12
- Flexural Strength7 3500 psi @ 5% (246.1 kg/cm2 )
- Thermal Conductivity4 Cal • cm/cm2 • sec • °C Watt/m • k @ 29 °C 11.1 x 10-4 0.463
- Glass Transition Temp (Tg) 22ºC
- Linear Thermal Expansion (LTE)9 (length/unit length/°C) Tg .57 x 10-4 1.65 x 10-4
- Thermal Shock1 10 cycles -65 to 155ºC 1/8” (3,165 mm)
- Olyphant Insert Pass Thermal Shock 1 10 cycles – 55 to 130°C ¼” (6,35 mm)
- Olyphant Insert Fail Flame Retrdancy2 Self-Extinguishing Fungus Resistance10 Fungus Resistant Rating: 2
Close
3M Scotchcast Electrical Resin MR283F075
• Thermal shock resistant
• Hydrolytically stable
• Temperature rating – Class B or F
Close
3M Scotchcast Flame Retardant Compound 2130C
- 80 Shore A hardness
- Has 15-minute gel time at 75 degrees F (23 degrees C)
- Useful for replacing or repairing the jacket on both single- and multi-core power cables
- Comes in black color
- 21.7-oz capacity size C bag
- Withstands a temperature range of 32 to 194 degrees F (0 to 90 degrees C)
- Elongates 175% longer than its original size for easy insulation or wrapping
- Flame-retardant and moisture-resistant resin withstands a voltage rating of 1 kV or less
- MSHA Approved
- 10 containers/case
Close
3M Scotchcast Flame-Retardant Compound 2131
Electrical, Electronic Solution, Flexible, Liquid Resins, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Flame-Retardant Compound 2131 is a two-part polyurethane resin designed to replace the cable jacket when splicing or repairing mine and portable cables.
- It can withstand the rugged conditions under which mine and portable cables operate.
Close
3M Scotchcast Flexible Power Cable Inline Splicing Kits 82-F Series
- 3M™ Scotchcast™ Flexible Power Cable Inline Splice Kit 82-F Series is a series of flexible inline splices for use on non-shielded portable power cables and cords.
- The kits are rated up to 5 kV for single conductor and up to 1 kV for multiple conductors.
Close
3M Scotchcast Re-Enterable Electrical Insulating Resin 2123
Electrical, Electronic Solution, Liquid Resins, Re-Entrable, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Re-enterable Electrical Resin 2123 is a soft, two-part polybutadiene resin encapsulant designed especially for re-enterable splice protection.
- It is formulated for virtually every electrical application requiring a soft, re-enterable resin.
Close
3M Scotchcast Wire Coating Resin 5400
- Has 15 to 25-second gel time at 400 degrees F (204 degrees C)
- Useful for coating cellulose-based materials, core steels and various varnishes
- Comes in yellow-tan color
- 50-lb capacity
- Elongates 50% longer than its original size for easy insulation or wrapping
- Good impact and heat shock resistance
- UL Listed, EIS Approved and RoHS 2011/65/EU Compliant
Close
3M Scotchfil Electrical Insulation Putty
- Non-corrosive mastic adhesive in a flexible tape form
- UL Listed and RoHS 2011/65/EU Compliant
- Suitable for temperatures from 32 to 176 degrees F (0 to 80 degrees C).
- 1 roll/carton, 12 rolls/case
Close
3M Scotchkote 3065 BG Urethane Coating
Product Description Scotchkote 3065BG Urethane Coating has been specifically developed as a 100% solids coating with a degree of flexibility
Close
3M Scotchkote 3065 Urethane Coating
- Adhesion— Excellent to both blast cleaned and mechanically scraped surfaces.
- Corrosion Resistance— Excellent even under aggressive immersion conditions.
- Chemical Resistance— Virtually unaffected by most industrial chemicals.
Close
3M Scotchkote Epoxy Ceramic Surfacer CR 511
Technical Details
- Combines good application characteristics with good erosion and corrosion resistance.
- Designed for application by brush.
- Provides a low friction surface improving flow rates in pumps etc.
- Meets BS6920 criteria for contact with potable water.
- WRAS Water Regulatory Advisory Scheme approved product.
- Available in 1kg x 4 pack or 3kg x 4 pack.
Close
3M Scotchkote Epoxy Coating 145 UC
Protects containment areas against spills and tank breaches.
Close
3M Scotchkote Epoxy Coating 152 LVAS+
- Resistance to wide variety of hydrocarbon products & industrial chemicals.
- Heavy duty solvent free refurbishment systems for tank roofs.
Close
3M Scotchkote Epoxy Coating 162 HB/162HBL
Cable Coating/Insulation Coating, Corrosion Protection, Corrosion Protection Coating, Electrical, Weather Protection
Protects internal and external surfaces against attack from aggressive chemicals and fuels.
3M™ Scotchkote™ Epoxy Coating 162HB provides excellent pipeline corrosion resistance for both internal and external surfaces. This 100% solids lining can be used to coat pipes, tanks, vessels and other equipment in contact with sea water, raw water and wastewater. Scotchkote™ Epoxy Coating 162HB may be used on concrete and cementious surfaces when used with Scotchkote™ Epoxy Sealer SP 810.
Close
3M Scotchkote Epoxy Coating 175UC
- Combines good application characteristics with excellent corrosion protection and ultimate chemical resistance.
- Applied in two or more coats by brush or roller.
- For use on steel and concrete surfaces with an appropriate primer.
Close
3M Scotchkote Epoxy Coating EA 29
- Combines good application characteristics with excellent corrosion protection.
- As a primer, it offers long term corrosion protection of ferrous metallic substrates.
- As the basis of multi coat system, Scotchkote Epoxy Coating EA29 can be over coated with itself or with other Scotchkote finishes.
- Adhesion - Excellent to both blast cleaned and mechanically scraped surfaces.
- Corrosion Resistance - Excellent even under aggressive conditions.
- Chemical Resistance – The fully cured coating offers outstanding resistance to aqueous solutions and wide range of industrial chemicals.
- onsult 3M Technical for specific chemical exposure.
- Temperature Resistance – Suitable for use up to 100°C in dry service condition
Close
3M Scotchkote Epoxy Coating GP 220
- Corrosion and Chemical resistance: Excellent even in severe Industrial& harsh marine environment.( ISO 12944 C-5 I & C-5 M).
- Is designed for application by brush, spray or roller
- Apart from Abrasive blasted surface, the product is suitable for application on mechanically prepared steelwork or high pressure water cleaned steel.
- Compatible with tightly adherent aged coatings.
- Can be used as Direct to metal / Intermediate / top coat and also can be over coated with variety of top coats as required.
- Temperature Resistance: Dry service temperature range upto 100°C
Close
3M Scotchkote Epoxy HT Lining HT 517
Scotchkote Epoxy HT Lining HTX 517 has been specifically developed as a 100% solids epoxy coating for resurfacing and lining equipment operating at high temperatures.
Product Features:
- Combines good application characteristics with good corrosion and temperature resistance
- Designed for application by brush or plural feed hot spray
- Provides a high build protective system capable of resisting wet heat up to 150°C
- Primarily designed for resurfacing and lining metal components
- Excellent adhesion to correctly prepared metal surfaces.
Close
3M Scotchkote Epoxy Metal repair EG 503
Protects pumps, turbines, scrolls & valves against erosion from corrosion, chemical abrasion and impingement attack
Close
3M Scotchkote Epoxy Metal repair EG503
3M™ Scotchkote™ Epoxy Metal Repair EG 503 is a specifically developed high performance metal compound that provides good mechanical strength combined with easy machining properties.
- Combines good machining characteristics with good mechanical properties
- Product is designed for application by trowel or spatula at thicknesses up to 12 mm
- Provides outstanding cold weld capabilities
- Designed for use to repairs to cracked casting and rebuilding worn shafts, bearing housings and flanges
- Excellent adhesion to correctly prepared metal surfaces
Close
3M Scotchkote Epoxy Metal Surfacer FG 502
Protects against attack from bi-metallic corrosion, chemicals and high operating temperatures n No shrinkage
Close
3M Scotchkote Epoxy Primer GP120+
Combines good application characteristics and excellent corrosion protection.
- Brush, roller or spray.
- Can be used as a two coat primer/finish system.
- Suitable for manually prepared or high pressure water cleaned steel.
- Silver
Close
3M Scotchkote Liquid Epoxy Coating 321
3M™ Scotchkote™ Liquid Epoxy Coating 321, can be used as a patch material, girthweld coating, and pipeline rehabilitation in a wide variety of other field applications where corrosion protection coating of metal is required.
