Close
3M P130
P130 Chemical Sorbent Roll is designed to cover large surfaces and may be easily cut to fit tight corners. it can also be used to cover large spills or as a precaution in areas where large sills may occur.
Features and Benefits include: Promotes safety on the site Immediate response to chemical spillages Fast and effective containment and clean-up Suitable for use with most chemicals Easy to dispose of Available in several formats including mini-booms, pillows, sheets and rolls Products have a high capacity Can be used with any aggressive chemicals
Close
3M Scotchcast Electrical Resin MR283
- Not for specifications. Values are typical, not to be considered minimum or maximum.
- Properties measured at room temperature 73°F (23°C) unless otherwise stated.
- Physical Properties * Typical Value US units (metric) Hardness (Shore D
- ) 80 Specific Gravity (cured)3 1.55
- Compressive Strength6 10%
- Compression 5500 psi @ 10% (38.,7 kg/cm2 )
- Tensile Strength2 Ultimate 3700 psi (260,1 kg/cm2 )
- Elongation (% at break)5 12
- Flexural Strength7 3500 psi @ 5% (246.1 kg/cm2 )
- Thermal Conductivity4 Cal • cm/cm2 • sec • °C Watt/m • k @ 29 °C 11.1 x 10-4 0.463
- Glass Transition Temp (Tg) 22ºC
- Linear Thermal Expansion (LTE)9 (length/unit length/°C) Tg .57 x 10-4 1.65 x 10-4
- Thermal Shock1 10 cycles -65 to 155ºC 1/8” (3,165 mm)
- Olyphant Insert Pass Thermal Shock 1 10 cycles – 55 to 130°C ¼” (6,35 mm)
- Olyphant Insert Fail Flame Retrdancy2 Self-Extinguishing Fungus Resistance10 Fungus Resistant Rating: 2
Close
3M Scotchcast Electrical Resin 281
- These filled versions of 3M™ Scotchcast™ Electrical Resin 280 offer many of the key features of 280 plus lower shrinkage,
- improved thermal and mechanical shock resistance, and high thermal conductivity.
Close
3M Scotchcast Electrical Resin 235
- 3M™ Scotchcast™ Electrical Resin 235 system has permanent semiflexibility, thermal shock and impact resistance, good electricals and adhesion properties.
- Very low viscosity and good wetting ability allow for complete impregnation of small voids.
Close
3M Scotchcast Electrical Resin 280
- 3M™ Scotchcast™ Electrical Resin 280 is characterized by its high-temperature stability,
- superior electrical properties and thermal shock resistance.
Close
3M Scotchcast Electrical Resin 252
- 45 Barcol hardness
- Has 23-minute gel time at 248 degrees F (120 degrees C)
- Suitable for use in dip coating and wet winding applications
- Comes in reddish-brown color
- 20-lb capacity
- Withstands temperatures of 311 degrees F (155 degrees C)
- Smooth and uniform coatings can be achieved with minimal dripping
- Greater mechanical strength and temperature stability
- MIL-I-16923E Certified and RoHS 2011/65/EU Compliant
Close
3M Scotchcast Electrical Resin 251
- This medium viscosity, filled version of 3M™ Scotchcast™ Electrical Resin 250 offers many of the same advantages plus lower shrinkage,
- improved mechanical and thermal shock resistance and higher thermal conductivity.
- It has been tested to the requirements of MIL-I-16923G.
Close
3M Scotchcast Electrical Resin 3
- 80 Shore D hardness
- Has 21-minute gel time at 250 degrees F (121 degrees C)
- Suitable for impregnating, potting and encapsulating applications such as coils, transformers and modules
- Comes in clear amber color
- 1-gal capacity
- Withstands a temperature range of 32 to 266 degrees F (0 to 130 degrees C)
- Elongates 2% longer than its original size for easy insulation or wrapping
- Low-viscosity and fine-wetting properties allow complete impregnation of fine wires in coils
- MIL-I-16923E Certified and RoHS 2011/65/EU Compliant
- 10 lbs/kit
Close
3M Scotchcast Electrical Resin 250
- 3M™ Scotchcast™ Electrical Resin 250 has high-temperature stability, good electrical and physical properties, and low viscosity.
- It is used where adhesion, mechanical strength and good electricals at high temperatures are needed.
Close
SILICONI SF-20
- Lubricant for food industry
- Registered NSF, category H1
- Colour and odourless
- For joints, gears, mechanical movements
Close
SILICONI SF-10
- For food industry
- It contains silicone
- Anthiadhesive, sliding
- Registered NSF, category H1
Close
Siliconi – Coating INOXSIL Stainless Steel
- Steel color
- Does not run
- Dries quickly
- Resistant to oxidation
- For steel parts
Close
SILICONI – CRACK DETECTION # 3 RIVELEX
- White powder
- It highlight cracks in red colour
- Rapid evaporation
Close
SILICONI MULTIGREASE JAR
- 100% Silicone Wax Containers Capacity:3ML Size:1.02 Inch*0.70Inch*0.66Inch
- Made Of Food-Grade Non-Stick Silicone,BPA Free,Withstands High Temperature
- Fuction: Freezer,Heat,Shatter Resistant And Heat Resistant Up To 450 degrees Fahrenheit
- Easy To Use And Clean,No Abnormal Odour Or Staining
- Eco-Friendly,Softness,Non-Stick Finish Flexible, Lightweight And Portable, Easy To Store And Transport Durable,Long-Standing,Long Life Time
Close
SILICONI MULTIGREASE CAN
- For gears, ball-bearings, pivots, mechanical movements
- Very sticky
- It does not drip
- Garages, car, home, industry
Close
Siliconi – Lubricants Moblube – 700 °C
- It contains micronized bisolfide of molybdenum
- It resists up to 700°C
- It does not drip – grey colour
- For ovens, ball bearings, joints, heaters
Close
Siliconi – Lubricants Lubrituf PTFE Dry Lub
- Provides high-performance lubrication and corrosion protection
- Safe for use on metal, rubber, wood, and vinyl
- Protects Electrical parts and is perfect for wet environments and marine use
- For use on Sliding Rails, Hinges, Catches, Valves, Runners, Levers, Pulleys plus much more
- Withstands temperatures of -40c to +220c
Close
Siliconi Special Lube
- For locks, rails, doors, hinges, boats
- Colourless
- Water repellent
- Suitable for plastic and rubber parts
Close
Siliconi Rocut 200
- Washable with watercIt does not give off unpleasant smokes
- To cut, thread, pierce, mill
- Suitable for hard metals and stainless steel
- Solvents free
Close
Siliconi Rocut
- Washable with watercIt does not give off unpleasant smokes
- To cut, thread, pierce, mill
- Suitable for hard metals and stainless steel
- Solvents free
Close
3M Scotch 1639 Polyurethane Foam Spray (400ml)
- This 3M Scotch 1639 Polyurethane Foam Spray (400ml) is made by the prestigious 3M brand.
- It's a Polyurethane Foam Spray that's ideal for sealing, filling, isolating and fitting.
- It expands upon contact with air, allowing for perfect sealing.
- This guarantees proper thermal and acoustic isolation. Contains 400ml.
Close
Siliconi – Cleaning Starter Aprimaglia
- It eliminates grease, glue, incrustations, ink
- It removes the labels
- Low evaporation
- Colourless
Close
Siliconi Multi-purpose PK Smart Nozzel
- RELEASING AGENT for screws, bolts, mechanisms blocked by rust;
- LUBRICANT for moving parts, electronic parts, automotive parts, bicycles, tools; useful for and household too.
- rust-preventive action for metal surfaces, it forms a film that grants a long last protection again corrosion caused by atmospherical agents and salt.
- DEOXIDIZER for electrical contacts: it reactivates the oxidized contacts and eliminates electrical dispersions;
- Water-repellent action: it eliminates water and moisture from all the treated surface;
- Antifreeze Action: resistant to temperatures below 0°C;
- cleaner and degreaser Action: removes grease, oil, incrustations from metal surfaces.
Close
Siliconi – Antispatters Ceramstak Application Kit
- CERAMSTAK is a Siliconi company product, it is a good anti-spray to protect the torch nozzle against adhesion drops.
- It lasts many hours (up to 8 hours) and has a high antioxidant adhesive than usual anti-sprays without silicone because it resists to very high temperatures.
- These features are reducible in terms of time, resources and improvements.
