IDEAL F RG59 Compression Connector
RG 59/6/6Q sized connectors are available for use in applications and installations from 5MHz to 3GHz, including CATV, satellite, HDTV and other A/V based applications
IDEAL F RG59
The IDEAL RTQ™ series of F connectors offer a single connector solution to cover a range of coax types. A patented compression sleeve design allows Regular (dual), Tri and Quad shield cables all to be terminated within a single connector. All RTQ connectors have an all brass exterior and an inner O-ring to provide a robust, weatherproof connection suitable for just about any application - indoors or outdoors.
CIRCUIT CW9400
| Digi-Key Part Number | CW9400-ND |
|
|---|---|---|
| Quantity Available | 173 Can ship immediately |
|
| Manufacturer |
Chemtronics |
|
| Manufacturer Part Number |
CW9400 |
|
| Description | FLUX REMOVING PEN LEAD-FREE |
|
| Manufacturer Standard Lead Time | 6 Weeks | |
| Detailed Description |
Flux Remover - Lead Free Pen, 0.32oz (9g) |
3M Thermally Conductive Silicone Interface Pad 5519
- Very high thermal conductivity (4.9 W/m-K)
- Hardness :Shore 00 = 70
- Good softness and conformability even to non-flat surfaces
- Slight tack allows pre-assembly. Good wettability for better thermal conductivity
- Good dielectric properties
- UL 94 V-0
- High temperature resistance
- Tacky both sides
- Thickness : 0.5 mm,1.0 mm, 1.5 mm, 2.0 mm, custom thickness
- Larger sheet size is available
IDEAL RCA RG 59 Compression Connector
- OmniCONN RCA compression connectors install easily onto standard RG 6 and RG 59 cable
- Constructed of nickel plated brass and gold plated head
- 75 ohm nominal impedance
- Bandwidth up to 3 GHZ
- Compatible with 30-603 and 30-793 OmniSEAL compression tools
IDEAL F RG6
The IDEAL RTQ™ XR™ series of F connectors offer a single connector solution to cover a range of coax types, including plenum rated versions. A patented compression sleeve design allows Regular (dual), Tri and Quad shield cables all to be terminated within a single connector. All RTQ connectors have an all brass exterior and an inner O-ring to provide a robust, weatherproof connection suitable for just about any application - indoors or outdoors.
3M Thermally Conductive Acrylic Interface Pad 5570N
- Pads available in 0.5, 1.0, 1.5 and 2.0 mm
- Soft for good conformability even to non-flat integrated circuit (IC) surfaces and heat spreading blocks
- Little to no siloxane gas/oil bleeding that can cause electric connection failures
- High pressure relaxation helps reduce pressure to electric components
- Good electrical insulation properties
- Slight tack allows easy pre-assembly
- Good wetting performance for better thermal conductivity
IDEAL BNC RG6 Compression Connector
- Nickel-Plated
- Brass Construction For Superior Corrosion Resistance
- Moisture-Inhibiting Design
- Approved For Indoor And Outdoor Use
3M Thermally Conductive Silicone Interface Pad 5549S
- Very high thermal conductivity and good electrical insulation properties
- Good softness and conformability even to non-flat surfaces
- Thin polymeric film carrier supported on one side for good converting and handling properties
- Slight tack allows pre-assembly
- Good dielectric properties
- Good wettability for better thermal conductivity
- High temperature resistance
- Tacky both sides
- Larger sheet size is available
3M Thermally Conductive Acrylic Interface Pad 5500H
- High thermal conductivity
- Good softness and conformability even to non-flat IC surfaces and heat spreading blocks
- Good flame retardant, UL 94 V-0 equivalent material
IDEAL BNC RG6
Installing one-piece compression BNC and right angle connectors just got easier. No more uncertainty when inserting the cable into the connector. No more collapsed centre pins. No more wasted connectors and rework time on the job.
3M Thermally Conductive Silicone Interface Pad 5583S
- Good thermal stability of the base polymer with excellent softness of the thermal pad
- Good thermal conductivity in a ultra soft silicone polymer base
- The product tack is such that a mechanical means to support the pad in a final assembly is required
- Thin PET film, 12 micrometer, carrier supported on one side for good converting and handling properties
IDEAL BNC RG59 Compression Connector
- Nickel-Plated
- Brass Construction For Superior Corrosion Resistance
- Moisture-Inhibiting Design
- Approved For Indoor And Outdoor Use
3M Thermally Conductive Silicone Interface Pad 5591
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a ultra soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
3M Thermally Conductive Acrylic Interface Pad 5590H
• Good softness and conformability to non-flat surfaces.
• Excellent compressive stress relaxation.
• High thermal conductivity.
• UL94 V-O certified (File No. E176845).
• Good surface tack leads to low thermal resistance at surface.
• Non-silicone acrylic elastomer.
• Good dielectric performance.
• Excellent durability for long term thermal conductivity and electric insulation stability.
3M Thermally Conductive Acrylic Interface Pad 5589H
- Good softness and conformability to non-flat surfaces
- Excellent compressive stress relaxation
- Non-silicone acrylic elastomer
- Good dielectric performance
- Good surface tack leads to low thermal resistance at surface
- Thickness : 1.0 mm, 1.5 mm
- Excellent durability for long term thermal conductivity and electric insulation stability
3M Thermally Conductive Silicone Interface Pad 5516S
- Good thermal conductivity (3.1 w/m-k)
- Good softness and is conformable at low pressure ( Shore 00 =72)
- Softness results in low stress on board components
- Good dielectric properties
- “S” version incorporates a thin polymeric film carrier for improved handling and a non-tacky surface for ease of rework
- Slight tack allows pre-assembly. Good wettability for better thermal conductivity
- UL 94 V-1
- High temperature résistance
- Tacky both sides
- Thickness : 0.5 mm,1.0 mm, 1.5 mm, 2.0 mm, custom thickness
- Larger sheet size is available
3M Thermally Conductive Silicone Interface Pad 5300-SP
- Single layer of silicone on polyimide carrier
- No surface tack
- Excellent heat stability
- Various thickness availability
- Dust Free (No contamination)
- High mechanical properties (high tear strength)
- High restoration force and no surface tack
- Excellent electrical insulation properties
IDEAL BNC RG59
Installing one-piece compression BNC and right angle connectors just got easier. No more uncertainty when inserting the cable into the connector. No more collapsed centre pins. No more wasted connectors and rework time on the job.
3M Thermally Conductive Silicone Interface Pad 5595S
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
- This "S" version has a permanent PEN film, 9 micrometer thick, on one side to provide for a non-tacky surface, increased puncture resistance, ease of handling and rework.
3M Thin Wall Heat Shrink Halogen Free
- Ideal for cable marking and identification applications
- Used in electronics, communication and transportation industries where it is necessary to limit toxic gases emitted in a fire.
- Halogen free; low toxic
