3M Epoxy Film Electrical Tape 1
- 3M™ Epoxy Film Electrical Tape 1 has a flame-retardant 2.2 mil epoxy film backing with excellent handling properties and high dielectric strength.
- This tape has an acrylic adhesive that is resistant to heat, oxidation, solvents and oils.
3M Extra Wide Adjustable Monitor Stand, MS90B
- Contemporary design with stacking columns raises monitor from 1" to 5 7/8" in increments of 1 5/8" to an ergonomically correct level
- Features extra wide 16 inch storage space underneath to maximize desk space
- Great for laptops, printers or monitors up to 40 lbs
- Non-skid base keeps stand in place
3M Extreme Sealing Tape 4411N • 4411G • 4411B • 4412N • 4412G
Product Features
- Bonds to many metals and plastics without drying time, dripping, oozing and require no clean-up
- No sticky mess
- Fastens to contours, edges, rivets and screw heads for a water tight seal with ease
- No caulking guns and empty cartridges
- Easy to paint and color blends to the adjoining surfaces
- Aesthetically precise and neat
- Withstands harsh environmental conditions - sun, rain, snow, temperature extremes and abrasion
- Flexibility allows for enduring vibration and thermal expansion/contraction
- No cracks or crumbles
3M F9460PC
- Transparent, double sided, 2.0 mil (0.05 mm) VHB™ transfer tape offers a thin profile combined with our high strength acrylic adhesive for a long-lasting bond
- Short term temperature tolerance of up to 500 °F (260 °C)
- Operating temperature tolerance of up to 300°F (149°C)
- Conforms to a variety of indoor and outdoor applications
- 58# polycoated kraft paper liner printed with 3M™ VHB™ branding
- Durable adhesive is chemical, UV and solvent resistant
- Ease of application increases productivity
3M F9473PC
- 10.0 mil high performance industrial joining and metal fabrication
- Excellent long-term holding power with higher adhesion strength than typical PSAs
- Transparent and ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives and other permanent fasteners
- Conforms to a variety of indoor and outdoor applications
- 58# polycoated kraft paper liner printed with 3M™ VHB™ branding
- Durable adhesive is chemical, UV and solvent resistant
3M FAHRENHEIT
- Soft crystal frame goggles with a wide support area all around the face to enhance comfort
- Specific channel on the side of the frame to accommodate the temple of prescription frames
- Model fits well with prescription glasses
- Available with an elastic nylon headband, a neoprene headband for good chemical resistance and easy cleaning or a special helmet attachment to fit the 3M™ G3000 Helmet
- Lens coatings provide excellent scratch resistance. An antifogging coating is applied to the majority of the range.
- Designed to be worn with prescription eyewear
- Clear, replaceable lens films provide additional protection against abrasion
3M FF 402
- Scotchgard protection paint and stain resistant lens cause some liquids to bead up so they can be wiped off easily
- Large lens provides a wide field of view for excellent visibility
- Silicone full facepiece design offers comfort, durability, and ease of cleaning
- 3M Cool Flow Valve makes breathing easier to provide cool, dry comfort
- Passive speaking diaphragm enhances communications
3M Filament Tape 1039
3M™ Electrical Filament Tape 1039, 23" x 60 yds., on paper core, is made of an electrical-grade polyester film backing, reinforced with scrim glass filaments and a chemically resistant acrylic pressure-sensitive adhesive.
3M Filament Tape 1076
3M™ Electrical Filament Tape 1076, paper core, is is made of an electrical-grade paper backing, reinforced with scrim glass filaments and an oil-compatible acrylic pressure-sensitive adhesive. 23" x 60 yds .
3M Filament-Reinforced Electrical Tape 1339
- 3M™ Filament-Reinforced Electrical Tape 1339 is a 6.5 mil glass filament-reinforced polyester film backing with high-shear strength acrylic adhesive.
- On a 3 inch paper core.
3M Filter Retainer 501
- Approved 3M system component
- Designed to hold 3M Particulate Filter 5N11 and 5P71/07194 (AAD) (sold separately)
- The component works with 3M Respirator 5000 Series, 3M Cartridges 6000 Series, and 3M™ Filter Adapter 603
- Color: Translucent white
- Measures 4” high x 8.5” long x 4.5” wide
- Refer to the Filter/Cartridge User Instructions for further information.
3M Finesse-it Buffing Pad – White Foam
- Provides soft, smooth surface for applying 3M™ Finesse-it™ polishes
- Waffle face provides sufficient contact surface without excess heat build-up
- Repairs and restores coatings without repainting
- 3M™ Hookit™ attachment system holds pad securely and provides quick pad change-out
3M Finesse-it Finishing Material
- Removes swirl marks and micro grade sanding scratches
- Ideal for spot repair on OEM clear coats
- Wax and silicone free formula
3M Finesse-it Polish
- Removes swirl marks after compounding
- Chemically safe for clear coats
- Creates a deep, high gloss finish
- Wax and silicone free formula
- Easy cleanup
3M Finesse-it Roloc Finishing Disc Pad
- Enables use of 3M™ Hookit™ buffing pads with the 3M™ Roloc™ backup pad
- Hook-and-loop system provides quick and easy pad attachment and removal
- Compressibility of the foam provides conformability
- Roloc™ quick-change attachment system provides fast pad change out for multi-step finishing processes
- Buffing pads are sold separately
3M Fire and Barrier Tape
Ideal for sealing perimeter joints (curtain wall joints) and other construction joints as well as some through-penetration applications. When installed
properly (using mineral wool or backer rod if needed), this tape acts as a barrier to fire, water, smoke and sound.
Ideal for sealing perimeter joints (curtain wall joints) and other construction joints as well as some through-penetration applications. When installed
properly (using mineral wool or backer rod if needed), this tape acts as a barrier to fire, water, smoke and sound.
- Up to 4-hour fire protection in construction joints (ASTM E1966/UL 2079)
- Up to 3-hour fire protection in perimeter joints (ASTM E2307)
- Up to 2-hour fire protection in through-penetration applications (ASTM E814/UL 1479)
- Great for water protection: meets UL Water Leakage Test, W Rating — Class 1 requirement; tested and immediately passed ASTM D 6904 Rain Resistance Test.
3M Fire Barrier CP 25WB+ Sealant
Our most popular fire stop sealant approved up to 4-hours when used with most plastic and metal pipes.
- Australian standard testing in accordance with AS1530.4
- International testing in accordance with EN1366
- Provides up to 4-hours
- Superior adhesion – bonds to concrete, metals, wood,
plastic and cable jacketing - Intumescent – expands when heated to seal around items
consumed by fire
* Not approved for use with CPVC pipes
3M Fire Barrier Duct Wrap 615+
Manufactured with a man-made vitreous spun fiber, a calcium magnesium
silicate (CMS) wool technology which is bio-soluble, allowing for low thermal
transfer properties in a lightweight, low profile, easy to apply the product.
Lightweight 96 kg/m3 and thin 38 mm for easier application
Broadest and most economical tested duct hanging support system in the
industry
- Up to 2 hour fire protection tested to AS530.4
- Certified for grease ducts to ASTM E 2336 (including ASTM E 119 engulfment) in 2-layer systems
- Certified for ventilation ducts to ISO6944 in 1-layer systems and for other key life-safety duct applications
- Available in 38mm x 609 mm x 7.6m & 38mm x 1220 mm x 7.6m rolls
3M Fire Barrier Expantrol Flexible Intumescent Strip (E-FIS)
Designed to seal the air space between doors and frames and for glazing fire resistant glass to help prevent the passage of smoke and flames in the event of a fire.
- Expands when heated to seal around objects consumed by fire.
- Retards spread of toxic by-products of combustion
- Excellent flexibility, easy, cost-effective installation
- Low flame spread and smoke development
- Can be cut to fit irregular shapes
- No special tools required
- Non-flame supporting
- Low odour
3M Fire Barrier IC 15WB+ Sealant
Affordable UL, general-purpose sealant approved up to 4-hours when used with plastic and metal pipes.
- Australian standard testing in accordance with AS1530.4
- International testing in accordance with EN 1366 and
- ASTM E814 (UL Listed)
- Provides up to 4-hours
- CPVC compatible
- Superior adhesion – bonds to concrete, metals, wood, plastic, and cable jacketing
- Intumescent – expands when heated to seal around items consumed by fire
3M Fire Barrier Moldable Putty MP+ Sticks
Designed to firestop a wide variety of through-penetrations, including cable, conduit, insulated pipe, and metal pipe.
- Pliable – can form into almost any desired shape
- Will not dry out or crumble – can be sealed for reuse
- Available in 36 x 152 mm and 36 x 279 mm stick sizes
3M Fire Barrier Moldable Putty MP+ Sticks & Pads
Designed to firestop a wide variety of through-penetrations, including cable, conduit, insulated pipe, and metal pipe.
- Pliable – can form into almost any desired shape
- Will not dry out or crumble – can be sealed for reuse
- Available in 3 mm thick pads:
- 102 x 203 mm, 178 x 178 mm and
- 241 x 241 mm sizes
3M Fire Barrier Mortar
Lightweight, gypsum-based and endothermic fire stop that is ready for mixing with potable water.
- Up to 2-hour fire ratings per EN-1366-3
- Variable mix ratio permits self-leveling as well as trowelable application
consistencies including concrete floors with 100 mm minimum thickness - Excellent adhesion – bonds to concrete, metals, wood, plastic, and cable jacketing
- Re-enterable/repairable with common trade tools
- Acts as a heat sink, reducing the likelihood of combustible matter igniting on the
unexposed side of the assembly - Dry mix available in 18.9 litre (12.7 kg) pails and 19.9 kg bags
3M Fire Barrier Packing Material PM4
Lightweight packing material to be used with through-penetration fire stops.
- Tested in accordance with ASTM E814 (UL Listed)
- Convenient, hand-tear dispensing
- For almost any through-penetrating firestop project
- Easy to use and less irritating to skin than competitive products
