Specification : |
|
| Dispensing Time | : 0.01 ~ 99.99 Second |
| Timing Interval | : 0.1 ~ 9.9 Second |
| Repeat Tolerance | : ± 0.05% |
| Minimum Deposit Size | : 0.01ml |
| Input Air Pressure | : 35 ~ 100 Psi |
| Output Air Pressure | : 1-100 Psi |
Hunter 982B Liquid Dispenser
- Dispense accurate dosage per volume required
- Timing injection controlled by Timer
- No waste on materials and user friendly
- Auto and manual mode available
Description
Shipping & Delivery
Warehouse
Our modern warehouse at Patparganj, New Delhi provides us the advantage to cater to the whole of India.
Shipping and Delivery
Our dedicated distribution team manages all the shipping/deliveries on a FIFO basis. If you have a special request or are in urgent need of a part, they would be happy to express ship it or personally hand deliver it to your location*. We understand the importance of having an up & running factory or production – We are Always happy to help .
Related products
Close
3M Anisotropic Conductive Film 5363
Details 3M™ Anisotropic Conductive Film (ACF) 5363 is a heat-bondable, electrically conductive adhesive film. The unbonded film is non-tacky at
Close
3M™ Thermally Conductive Adhesive Transfer Tape 8805
Electronic Solution, Electronic Tapes, Tapes, Thermal Conductive Materials, Thermal Tapes, Thermal Tapes
- High mechanical strength
- Improved surface wet-out for rough surface/LSE substrates
- Excellent shock performance
- Wider and longer roll is available
- Halogen free
- Ideal for thin bonding applications
- Good thermal transfer
Close
3M™ Fluorinert™ Heat Transfer Fluids
3M™ Novec™ Engineered Fluids and 3M™ Fluorinert™ Electronic Liquids are compatible with
a wide variety of materials used in heat transfer equipment. As with any design, selection of these
materials is very important. Our tech support can help you make the proper choice.
Polymers
Most of the materials commonly considered “hard” plastics will perform well with both Novec
fluids and Fluorinert liquids.
Elastomers
Elastomers should be limited to those that are not heavily plasticized. 3M engineers can assist
you with recommendations and testing on specific compounds.
Close
3M™ Novec™ 1700 Electronic Grade Coating
- Easy application and processing - dries in seconds without the need for thermal post-curing
- Requires little or no masking
- Allows solder-through repairability and is easily removed for rework & repair
- Contains no volatile organic compounds (VOCs) and has low global warming potential
- Is thermally and electrically stable with excellent dielectric properties
- Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
Close
11676
Details Item Number 11676 HP-Master Quickcrimper Part Comment HP-Master® Quickcrimper The stripped wire with sleeve can be crimped single-handed with
