BSD-1000/ BSD-1200
| Brand | Kilews |
|---|
Shipping & Delivery
Warehouse
Our modern warehouse at Patparganj, New Delhi provides us the advantage to cater to the whole of India.
Shipping and Delivery
Our dedicated distribution team manages all the shipping/deliveries on a FIFO basis. If you have a special request or are in urgent need of a part, they would be happy to express ship it or personally hand deliver it to your location*. We understand the importance of having an up & running factory or production – We are Always happy to help .
Related products
Close
3M 1125 Tape Copper Foil with Acrylic Adhesive
Details 3M™ 1125 Tape consists of a 1-ounce rolled copper foil with an acrylic, pressure-sensitive adhesive. 1-ounce copper foil backing
Close
EMI Absorbers
Details Flexible, high permeability magnetic sheets One-sided acrylic pressure-sensitive adhesive Low Halogen version of AB7000 series absorbers. Less than 900
Close
HS-51 SOLDERING STATION
- Speedy replacement of tips without requiring a tool.
- A setting lock feature is provided to secure the soldering temperature. This feature uses a password, and does not require a card or key.
- Features a sleep function (sleep sensitivity & time setting: 0 to 20°C & 0 to 999 minutes).
- Auto shut-off activated when a preset time elapses (setting range: 0 to 999 minutes).
- Station stacking is possible.
- Power cord：1.2 m
- Accessory: Soldering iron stand (tip cleaner)
Close
3M EMI Embossed Tinplated Copper Shielding Tape 1245
Details Embossed, copper foil backing resists discoloration and oxidation Offers stable contact resistance and good shielding effectiveness Embossed backing cuts
Close
HS-802 DESOLDERING STATION
Specifications ■Power cord:1.8 m Rated voltage / frequency 100V AC, 50 / 60Hz Power consumption 170 W Heater Ceramic heater
Close
HS-401 HOT TWEEZERS
Specifications 3-pin plug type. Power cord: 1 m Accessory: Dedicated soldering iron stand Rated voltage / frequency 100 to 240
Close
3M™ Fluorinert™ Heat Transfer Fluids
3M™ Novec™ Engineered Fluids and 3M™ Fluorinert™ Electronic Liquids are compatible with
a wide variety of materials used in heat transfer equipment. As with any design, selection of these
materials is very important. Our tech support can help you make the proper choice.
Polymers
Most of the materials commonly considered “hard” plastics will perform well with both Novec
fluids and Fluorinert liquids.
Elastomers
Elastomers should be limited to those that are not heavily plasticized. 3M engineers can assist
you with recommendations and testing on specific compounds.
Close
3M™ Novec™ 1700 Electronic Grade Coating
- Easy application and processing - dries in seconds without the need for thermal post-curing
- Requires little or no masking
- Allows solder-through repairability and is easily removed for rework & repair
- Contains no volatile organic compounds (VOCs) and has low global warming potential
- Is thermally and electrically stable with excellent dielectric properties
- Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
