Specifications
|
Adhesive Type
|
Acrylic
|
|
Application
|
Bonding Composite Materials, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Sealing, Potting and Encapsulating, Small Joint Assembly
|
|
Brand
|
Scotch-Weld™
|
|
Color
|
Blue, Blue
|
|
Design Challenges
|
Noise Vibration & Harshness Control NVH
|
|
Full Cure Time
|
8-24 Hours @ 72 F (22 C)
|
|
Hardness
|
55-60 Shore D
|
|
Indoor/Outdoor
|
Both
|
|
Industries
|
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
|
|
Maximum Operating Temperature (Celsius)
|
66 Degree Celsius
|
|
Maximum Operating Temperature (Fahrenheit)
|
250 Degree Fahrenheit
|
|
Mix Ratio Volume Base:Accelerator
|
10 : 1
|
|
Open Time
|
10 Minute, 10 minutes @ 72 F (22 C)
|
|
Physical Form
|
Flowable Liquid
|
|
Position
|
Best
|
|
Product Form
|
Cartridge, Gallon, Pail
|
|
Product Type
|
Structural Plastic Adhesive
|
|
Set Time
|
60 Minute
|
|
Shear Strength
|
2700 Pound-Force Per Square Inch
|
|
Shelf Life in Months (From Date of Manufacture)
|
12, 6
|
|
Specific Gravity
|
0.95-1.05, 1.01, 1.06
|
|
Storage Temperature
|
40 F (4.5 C), <= 40 Degree Fahrenheit (4.5 DegreeCelsius), <=40 Degree Fahrenheit
|
|
Substrate
|
Ceramic, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Metal (Painted), Metal (Unpainted), Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Plastics: LSE (Polypropylene, Polyethylene), Smooth, Stone, Wood, Wood & Hardboard
|
|
Substrate 1
|
Engineered Thermoplastics, Epoxy – Fiber Reinforced, Glass, Glass & Ceramics, LSE Plastics, Metal, Nylon – Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets – Fiber Reinforced, Wood, Wood & Hardboard
|
|
Substrate 2
|
Engineered Thermoplastics, Epoxy – Fiber Reinforced, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Nylon – Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets – Fiber Reinforced, Wood, Wood & Hardboard
|
|
Viscosity
|
Self-Leveling
|
|
Viscosity Range (cps) at Room Temperature
|
17,000-40,000, 20,000, 27,000
|
|
Volatile Organic Compounds (VOCs)
|
See Safety Data Sheet, Regulatory Data Sheet
|
|
Volume
|
1 gal, 1.58 Fluid Ounce, 17.24 Fluid Ounce, 5 gal
|
|
Volume (Metric)
|
19 L, 20 L, 45 ml, 490 ml
|
|
Work Time
|
8 Minutes
|
Details
- Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
- Medium viscosity allows controlled dispensing
- 10 minute work life with 60 minute handling strength
- Strong adhesive can replace screws, rivets and welding
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
Recommended Applications
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
