Close
3M Scotchcast Electrical Resin 5230N
Designed to offer excellent electrostatic charging capabilities. It provides smooth, uniform film build with good slot penetration when applied using an electrostatic fluid bed. UL Recognized method.
Close
3M Scotchcast Electrical Resin 5555
- This resin can be applied via cold electrostatic spray or electrostatic fluid bed.
- It also can be applied to pre-heated components by fluid bed dipping or by spraying.
- Its versatility allows it to be used on a wide variety of motor stators, armatures and other metal components needing electrical insulation.
- UL Recognized.
Close
3M Scotchcast Electrical Resin 8
Electrical, Electronic Solution, Liquid Resins, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Semiflexible, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Electrical Resin 8 is a low-stress, highly moisture-resistant compound that cures at room temperature.
- Offers long pot life, low viscosity, and is commonly used to coat printed circuit boards, pot connectors, and impregnate electrical and electronic components.
Close
3M Scotchcast Electrical Resin 9
- 3M™ Scotchcast™ Electrical Resin 9 is an easy-to-use resin system possessing medium viscosity and unique handling properties.
- High adhesion, low stress and low exotherm also reduce the effect of strain and temperature on sensitive components that have been coated with this resin.
Close
3M Scotchcast Electrical Resin MR283
- Not for specifications. Values are typical, not to be considered minimum or maximum.
- Properties measured at room temperature 73°F (23°C) unless otherwise stated.
- Physical Properties * Typical Value US units (metric) Hardness (Shore D
- ) 80 Specific Gravity (cured)3 1.55
- Compressive Strength6 10%
- Compression 5500 psi @ 10% (38.,7 kg/cm2 )
- Tensile Strength2 Ultimate 3700 psi (260,1 kg/cm2 )
- Elongation (% at break)5 12
- Flexural Strength7 3500 psi @ 5% (246.1 kg/cm2 )
- Thermal Conductivity4 Cal • cm/cm2 • sec • °C Watt/m • k @ 29 °C 11.1 x 10-4 0.463
- Glass Transition Temp (Tg) 22ºC
- Linear Thermal Expansion (LTE)9 (length/unit length/°C) Tg .57 x 10-4 1.65 x 10-4
- Thermal Shock1 10 cycles -65 to 155ºC 1/8” (3,165 mm)
- Olyphant Insert Pass Thermal Shock 1 10 cycles – 55 to 130°C ¼” (6,35 mm)
- Olyphant Insert Fail Flame Retrdancy2 Self-Extinguishing Fungus Resistance10 Fungus Resistant Rating: 2
Close
3M Scotchcast Electrical Resin MR283F075
• Thermal shock resistant
• Hydrolytically stable
• Temperature rating – Class B or F
Close
3M Scotchcast Flame Retardant Compound 2130C
- 80 Shore A hardness
- Has 15-minute gel time at 75 degrees F (23 degrees C)
- Useful for replacing or repairing the jacket on both single- and multi-core power cables
- Comes in black color
- 21.7-oz capacity size C bag
- Withstands a temperature range of 32 to 194 degrees F (0 to 90 degrees C)
- Elongates 175% longer than its original size for easy insulation or wrapping
- Flame-retardant and moisture-resistant resin withstands a voltage rating of 1 kV or less
- MSHA Approved
- 10 containers/case
Close
3M Scotchcast Flame-Retardant Compound 2131
Electrical, Electronic Solution, Flexible, Liquid Resins, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Flame-Retardant Compound 2131 is a two-part polyurethane resin designed to replace the cable jacket when splicing or repairing mine and portable cables.
- It can withstand the rugged conditions under which mine and portable cables operate.
Close
3M Scotchcast Re-Enterable Electrical Insulating Resin 2123
Electrical, Electronic Solution, Liquid Resins, Re-Entrable, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Re-enterable Electrical Resin 2123 is a soft, two-part polybutadiene resin encapsulant designed especially for re-enterable splice protection.
- It is formulated for virtually every electrical application requiring a soft, re-enterable resin.
Close
3M Scotchcast Wire Coating Resin 5400
- Has 15 to 25-second gel time at 400 degrees F (204 degrees C)
- Useful for coating cellulose-based materials, core steels and various varnishes
- Comes in yellow-tan color
- 50-lb capacity
- Elongates 50% longer than its original size for easy insulation or wrapping
- Good impact and heat shock resistance
- UL Listed, EIS Approved and RoHS 2011/65/EU Compliant
