Close
CIRCUIT CW9400
| Digi-Key Part Number | CW9400-ND |
Â
|
|---|---|---|
| Quantity Available | 173 Can ship immediately |
 |
| Manufacturer |
Chemtronics |
Â
|
| Manufacturer Part Number |
CW9400 |
Â
|
| Description | FLUX REMOVING PEN LEAD-FREE |
Â
|
| Manufacturer Standard Lead Time | 6 Weeks | Â |
| Detailed Description |
Flux Remover - Lead Free Pen, 0.32oz (9g) |
Close
CIRCUIT WORKS CONDUCTIVE GREASE CT40-5
- Â Heat Sink Grease silicone compound facilitates heat transfer away from electrical/electronic components.
- This heavy consistency material is thickened with a heat conductive metal oxide filler to maintain a positive heat sink seal in electrical/electronic equipment.
- Excellent thermal and dielectric properties
- Will not dry out, harden, or melt
- Noncorrosive and nonflammable
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW 7250
- Fills connector gaps to maximize electrical and thermal conductivity
- Maximum electrical conductivity and thermal conductivity
- Protects against moisture and corrosion
- Thermally stable over a wide temperature range
- Conductive lubricant containing pure silver
- Controls static discharge
- Grounds circuits
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7100
- High electrical conductivity
- Excellent thermal conductivity
- Provides protection against wear
- Remains stable in a wide temperature range; 70 to 485°F ( 57 to 252°C)
- Protects against moisture and corrosion
- Very low viscosity vs temperature change
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7100KG
• Fills connector gaps to maximize electrical and
thermal conductivity
• Protects against moisture and corrosion
• Thermally stable from -70°F/-57°C to
485°F/252°C
• Conductive lubricant containing pure silver
• Controls static discharge
• Grounds circuits
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7270
- Â Exceeds MIL-C-47113 for thermal conductivity
- Â Noncorrosive
- Â High dielectric strength
- Â Low migration
- Â Stable from -15ï‚°C to 200ï‚°C
- Â Nonflammable
Close
Conductive DE-250 ESD Desoldering Tool
- Light weight and compact in design
- Powerful, efficient enough for heavy duty de-soldering application
Replacement Tip : DE250RT
Close
EMI Absorbers
Details Flexible, high permeability magnetic sheets One-sided acrylic pressure-sensitive adhesive Low Halogen version of AB7000 series absorbers. Less than 900
Close
HOTweezers M-10, M-20
- Featuring an on/off switch, "HI" and "Low" jacks, a temperature control, and a unique holder for the HOTweezers hand unit. Â Placing the tweezers in the hand unit puts the temperature into 'idle' mode, then when you pick them up again they will adjust to the original temperature setting.
Close
HS-401 HOT TWEEZERS
Specifications 3-pin plug type. Power cord: 1 m Accessory: Dedicated soldering iron stand Rated voltage / frequency 100 to 240
Close
HS-51 SOLDERING STATION
- Speedy replacement of tips without requiring a tool.
- A setting lock feature is provided to secure the soldering temperature. This feature uses a password, and does not require a card or key.
- Features a sleep function (sleep sensitivity & time setting: 0 to 20°C & 0 to 999 minutes).
- Auto shut-off activated when a preset time elapses (setting range: 0 to 999 minutes).
- Station stacking is possible.
- Power cord：1.2 m
- Accessory: Soldering iron stand (tip cleaner)
Close
HS-802 DESOLDERING STATION
Specifications â– Power cord:1.8 m Rated voltage / frequency 100V AC, 50 / 60Hz Power consumption 170 W Heater Ceramic heater
Close
Hunter 195 Soldering Speed Tester
To calculate the soldering speed with preset temperature To compare Heat Recovery performance on different soldering station
Close
Hunter 201B ESD De-Soldering Station
- Rapid Heat Recovery, High frequency heating
- Large Digital Display to show actual temperature set
- Auto Sleeping & Shut Off mode for Power saving
- ESD Safe by Design
Close
HUNTER 203H ESD SOLDERING STATION
- Excellent Heat Recovery
- Auto Sleeping & Shut Off mode for Power saving
- Temparature Locked by using Password
- Easy replacement on iron tips without changing Sensors
- ESD Safe by design
Close
Hunter 2255D Lead Free Solder Pot
- Precise Temperature control by using Dual Digital Display with Micro-Computer Controller
- Excellent Heat Recovery speed to compensate temperature lose during dipping Process
- High quality stainless steel shape , plated with Titanium, to prevent leakage Specification
Close
Hunter 370 Self Feeder Soldering Station
- Excellent Heat Recovery
- Suitable for Lead Free process
- Auto and Manual feeding option
- Come with Foot pedal
- Adjustable Speed, Volume, Interval Time and Backing Time
Close
Hunter 372 Self Feeder Soldering Station with Hole Punching Feature
- Reduce Spattering problem during soldering process
- Help to improve on soldering quality
- Excellent Heat Recovery
- Adjustable Speed, Volume, Interval Time and Feeding Length
- Auto and Manual Feeding Mode
- Come with Foot Pedal
Close
Hunter 373C Self Feeder
- Adaptable to variety of soldering station or soldering irons
- Powerfully motor, automatic feeding with slide switches design
- Auto and manual feeding option
Close
Hunter 385 Solder Wire Breaker
- Reduce spattering problem during Soldering Process
- Help to improve on soldering quality
- Portable, Light Weight
Close
Hunter 386 Tip Cleaner
- Will Remove residue without damage on Tips
- Compact in Size, Light Weight
- Easy to use
Close
Hunter 445 + 446 Ionizing Gun with Power Supply
- Rapid neutralization static charges
- Suitable for remove small and minor particular on product surface
- Generate and balance the Ion supply efficiently
Close
HUNTER 492 ESD SMOKE ABSORBER
Anti-Static Solutions (ESD), Electronic Solution, Smoke Absoeber, Smoke Absorber, Soldering Solution
- Adjustable, Low Noise, Powerful Absorber Fan
- ESD Safe
- Activated Carbon Filter with high absorbing performance
