Close
3M Novec 7500 Engineered Fluid
- Wide range of thermal management applications
- Wide liquid range
- Non-flammable
- Non-conductive
- Compatible with plastics
- Low toxicity
- Low Global Warming Potential (GWP)
- Zero ozone depletion potential
- VOC-exempt solvent (US EPA)
Close
CIRCUIT CONDUCTIVE PEN RANGE
- This conductive ink pen is very adaptive and dynamic! Use it on any surface a rollerball pen will write on.
- The Circuit Scribe can draw 60-200 meters. 60 meters is seen on surfaces similar to a napkin and 200+ meters on photo paper.
- Pen erases on photo paper by scratching the ink away and is also the most conductive on this surface (<2 ohms/cm).
- Soldering is also possible but tricky and greatly dependent on paper/surface type and solder type.
Close
Close
CIRCUIT CW3700
- Zaps adhesives, tape & label residues
- Eliminates ink and pencil marks
- Fast acting conformal coating remova
- Simple to use, easy to carry
- Mild citrus aroma
- Fast drying
- Low toxicity
Close
CIRCUIT CW9200
Specifications for this item
| Part Number | 408-398-ML |
|---|---|
| UPC | 632963585470 |
| Brand Name | CircuitWorks |
| EAN | 0632963585470 |
| UNSPSC Code | 23271802 |
Close
CIRCUIT CW9400
| Digi-Key Part Number | CW9400-ND |
|
|---|---|---|
| Quantity Available | 173 Can ship immediately |
|
| Manufacturer |
Chemtronics |
|
| Manufacturer Part Number |
CW9400 |
|
| Description | FLUX REMOVING PEN LEAD-FREE |
|
| Manufacturer Standard Lead Time | 6 Weeks | |
| Detailed Description |
Flux Remover - Lead Free Pen, 0.32oz (9g) |
Close
3M Thermally Conductive Silicone Interface Pad 5519
- Very high thermal conductivity (4.9 W/m-K)
- Hardness :Shore 00 = 70
- Good softness and conformability even to non-flat surfaces
- Slight tack allows pre-assembly. Good wettability for better thermal conductivity
- Good dielectric properties
- UL 94 V-0
- High temperature resistance
- Tacky both sides
- Thickness : 0.5 mm,1.0 mm, 1.5 mm, 2.0 mm, custom thickness
- Larger sheet size is available
Close
Close
3M Thermally Conductive Acrylic Interface Pad 5570N
- Pads available in 0.5, 1.0, 1.5 and 2.0 mm
- Soft for good conformability even to non-flat integrated circuit (IC) surfaces and heat spreading blocks
- Little to no siloxane gas/oil bleeding that can cause electric connection failures
- High pressure relaxation helps reduce pressure to electric components
- Good electrical insulation properties
- Slight tack allows easy pre-assembly
- Good wetting performance for better thermal conductivity
Close
3M Thermally Conductive Silicone Interface Pad 5549S
- Very high thermal conductivity and good electrical insulation properties
- Good softness and conformability even to non-flat surfaces
- Thin polymeric film carrier supported on one side for good converting and handling properties
- Slight tack allows pre-assembly
- Good dielectric properties
- Good wettability for better thermal conductivity
- High temperature resistance
- Tacky both sides
- Larger sheet size is available
Close
3M Thermally Conductive Acrylic Interface Pad 5500H
- High thermal conductivity
- Good softness and conformability even to non-flat IC surfaces and heat spreading blocks
- Good flame retardant, UL 94 V-0 equivalent material
Close
3M Thermally Conductive Silicone Interface Pad 5583S
- Good thermal stability of the base polymer with excellent softness of the thermal pad
- Good thermal conductivity in a ultra soft silicone polymer base
- The product tack is such that a mechanical means to support the pad in a final assembly is required
- Thin PET film, 12 micrometer, carrier supported on one side for good converting and handling properties
Close
3M Thermally Conductive Silicone Interface Pad 5591
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a ultra soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
Close
3M Thermally Conductive Acrylic Interface Pad 5590H
• Good softness and conformability to non-flat surfaces.
• Excellent compressive stress relaxation.
• High thermal conductivity.
• UL94 V-O certified (File No. E176845).
• Good surface tack leads to low thermal resistance at surface.
• Non-silicone acrylic elastomer.
• Good dielectric performance.
• Excellent durability for long term thermal conductivity and electric insulation stability.
Close
3M Thermally Conductive Acrylic Interface Pad 5589H
- Good softness and conformability to non-flat surfaces
- Excellent compressive stress relaxation
- Non-silicone acrylic elastomer
- Good dielectric performance
- Good surface tack leads to low thermal resistance at surface
- Thickness : 1.0 mm, 1.5 mm
- Excellent durability for long term thermal conductivity and electric insulation stability
Close
3M Thermally Conductive Silicone Interface Pad 5516S
- Good thermal conductivity (3.1 w/m-k)
- Good softness and is conformable at low pressure ( Shore 00 =72)
- Softness results in low stress on board components
- Good dielectric properties
- “S” version incorporates a thin polymeric film carrier for improved handling and a non-tacky surface for ease of rework
- Slight tack allows pre-assembly. Good wettability for better thermal conductivity
- UL 94 V-1
- High temperature résistance
- Tacky both sides
- Thickness : 0.5 mm,1.0 mm, 1.5 mm, 2.0 mm, custom thickness
- Larger sheet size is available
Close
3M Thermally Conductive Silicone Interface Pad 5300-SP
- Single layer of silicone on polyimide carrier
- No surface tack
- Excellent heat stability
- Various thickness availability
- Dust Free (No contamination)
- High mechanical properties (high tear strength)
- High restoration force and no surface tack
- Excellent electrical insulation properties
Close
3M Thermally Conductive Silicone Interface Pad 5595S
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
- This "S" version has a permanent PEN film, 9 micrometer thick, on one side to provide for a non-tacky surface, increased puncture resistance, ease of handling and rework.
Close
3M Thermally Conductive Silicone Interface Pad 5595
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base.
- The product tack is such that a mechanical means to support the pad in a final assembly is required.
Close
3M Thermally Conductive Silicone Interface Pad 5586
• Good softness and conformability even to non-flat surfaces
• Good thermal conductivity
• Good electrical insulation properties
• Compression relaxation properties reduces pressure to electric components
• Slight tack allows pre-assembly
• Good wettability for improved and lower thermal resistance
Close
3M Thermally Conductive Silicone Interface Pad 5584
- Good thermal stability of the base polymer with excellent softness of the thermal pad.
- Good thermal conductivity in a soft silicone polymer base
- The product tack is such that a mechanical means to support the pad in a final assembly is required
Close
CIRCUIT WORKS CONDUCTIVE GREASE CT40-5
- Heat Sink Grease silicone compound facilitates heat transfer away from electrical/electronic components.
- This heavy consistency material is thickened with a heat conductive metal oxide filler to maintain a positive heat sink seal in electrical/electronic equipment.
- Excellent thermal and dielectric properties
- Will not dry out, harden, or melt
- Noncorrosive and nonflammable
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW7270
- Exceeds MIL-C-47113 for thermal conductivity
- Noncorrosive
- High dielectric strength
- Low migration
- Stable from -15C to 200C
- Nonflammable
Close
CIRCUIT WORKS CONDUCTIVE GREASE CW 7250
- Fills connector gaps to maximize electrical and thermal conductivity
- Maximum electrical conductivity and thermal conductivity
- Protects against moisture and corrosion
- Thermally stable over a wide temperature range
- Conductive lubricant containing pure silver
- Controls static discharge
- Grounds circuits
