Close
Weather Proofing Kit
3M Standard Kit consists of following:
- 3M Scotch 23 tapes in 19 mm x 9 meter x 0.76 mm thick - 01 roll
- 3M Tartan 1710 19 mm x 18.3 meter x 0.177 mm thick - 01 roll
Close
11676
Details Item Number 11676 HP-Master Quickcrimper Part Comment HP-Master® Quickcrimper The stripped wire with sleeve can be crimped single-handed with
Close
3M EMI Embossed Tinplated Copper Shielding Tape 1245
Details Embossed, copper foil backing resists discoloration and oxidation Offers stable contact resistance and good shielding effectiveness Embossed backing cuts
Close
3M Anisotropic Conductive Film 5363
Details 3M™ Anisotropic Conductive Film (ACF) 5363 is a heat-bondable, electrically conductive adhesive film. The unbonded film is non-tacky at
Close
EMI Absorbers
Details Flexible, high permeability magnetic sheets One-sided acrylic pressure-sensitive adhesive Low Halogen version of AB7000 series absorbers. Less than 900
Close
3M Electromagnetic Compatible Products
These solutions include an innovative line of 3M™ Electromagnetic Compatible Products that can control electromagnetic interference from internal sources, limit
Close
3M Scotchfil Electrical Insulation Putty
- Non-corrosive mastic adhesive in a flexible tape form
- UL Listed and RoHS 2011/65/EU Compliant
- Suitable for temperatures from 32 to 176 degrees F (0 to 80 degrees C).
- 1 roll/carton, 12 rolls/case
Close
Scotch Vinyl Color Coding Electrical Tape 35
- Excellent electrical and mechanical protection from combined pressure-sensitive, rubber-resin adhesive and PVC backing
- Pressure sensitive rubber adhesive bonds easily and securely
- Suitable for use in phase identification, color coding of motor leads and piping systems and for marking safety areas
- Tensile strength rating of 17 lbs. per inch meets professional electrical standards
- Available in blue, brown, gray, green, orange, red, violet, white, yellow, and pink
- Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
- UL Listed, VDE, CSA Certified and RoHS 2011/65/EU Compliant
Close
3M TAPE 361
- Strong abrasion resistant backing provides strength for bundling, harnessing and protection applications requiring high tensile strength
- Silicone adhesive provides good holding power and clean removal across a wide range of temperatures
- Withstands temperatures from -65°F/-54°C to 450°F/232°C and intermittent temperatures up to 550°F/288°C or higher, depending on the type and duration of the heat source
- Can be certified to meet F.A.R. 25.853, flame resistant specification
- Used for permanent sealing of high temperature ducts or chambers
Close
3M Scotch 1639 Polyurethane Foam Spray (400ml)
- This 3M Scotch 1639 Polyurethane Foam Spray (400ml) is made by the prestigious 3M brand.
- It's a Polyurethane Foam Spray that's ideal for sealing, filling, isolating and fitting.
- It expands upon contact with air, allowing for perfect sealing.
- This guarantees proper thermal and acoustic isolation. Contains 400ml.
Close
3M Scotchcast Electrical Resin 8
Electrical, Electronic Solution, Liquid Resins, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Semiflexible, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Electrical Resin 8 is a low-stress, highly moisture-resistant compound that cures at room temperature.
- Offers long pot life, low viscosity, and is commonly used to coat printed circuit boards, pot connectors, and impregnate electrical and electronic components.
Close
3M Scotchcast Flame-Retardant Compound 2131
Electrical, Electronic Solution, Flexible, Liquid Resins, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Flame-Retardant Compound 2131 is a two-part polyurethane resin designed to replace the cable jacket when splicing or repairing mine and portable cables.
- It can withstand the rugged conditions under which mine and portable cables operate.
Close
3M Scotchcast Re-Enterable Electrical Insulating Resin 2123
Electrical, Electronic Solution, Liquid Resins, Re-Entrable, Resin, Resin Soltuions, Resins, Resins, Room Cure Resins, Sprays and Resins, Weather Protection
- 3M™ Scotchcast™ Re-enterable Electrical Resin 2123 is a soft, two-part polybutadiene resin encapsulant designed especially for re-enterable splice protection.
- It is formulated for virtually every electrical application requiring a soft, re-enterable resin.
Close
3M heat shrink termination kit low voltage power cable upto 1100v/1.1kv
- Available for 1-Core(1C),3-Core(3C),3.5-Core(3.5C) and 4-Core(4C) power cables
- Provides excellent environmental protection and moisture sealing
- Wide conductor size ranges upto 500 mm2
Close
3M MEDIUM VOLTAGE 11KV/22V/33KV
- Viable cost-based alternative to heat shrink cable joints
- Simple installation – easier to use in enclosed areas
- Safe installation – no torches or heat required
- Less room for cable jointer error
- Extensive quality and factory testing programme
- Lower installed cost – compared to many competitive cable joint products
- Accommodates a wide range of cable sizes
- Rated from 3.6/6.6 (7.2)kV up to 19/33 (33)kV
Close
3M HIGH VOLTAGE 66KV/110KV/132KV
- The versatile design of the silicone cold shrink Termination body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C.
- No heat, flame, or special tools are needed during splice body installation.
- Accommodates crimp or mechanical Lugs up to 110mm in diameter.
- Wide application range covering several cable cross sectional areas from 120mm² – 2000mm².
- Solderless earth connection to copper screen wires or lead sheath.
- Silicone rubber Cold Shrink outer rain sheds and sealing PST’s provide physical protection and moisture sealing of the completed Termination. Datasheet Page 2 of 3 Issue 7
- The Silicone outer rain sheds of the Termination makes it ideal for zones with maximum environmental contamination, industrial or coastal.
- Creepage path connection for additional protection in areas of high pollution.
Close
3M Cold Shrink Cable Jointing Kits, 11KV/22KV/33KV
- One part joint body
- 100% tested after manufacture
- No heat required
- Tool free installation
- Permanent radial pressure
- Suitable for paper and polymeric cables
- Compatible with compression and mechanical connectors
- Low temperature installation
- Provides consistent installation quality
Close
3M High Voltage Cold Shrink Termination 66kv/72.5kv
- The versatile design of the silicone cold shrink Termination body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C.
- No heat, flame, or special tools are needed during splice body installation.
- Accommodates crimp or mechanical Lugs up to 110mm in diameter.
- Wide application range covering several cable cross sectional areas from 120mm² – 2000mm².
- Solderless earth connection to copper screen wires or lead sheath.
- Silicone rubber Cold Shrink outer rain sheds and sealing PST’s provide physical protection and moisture sealing of the completed Termination. Datasheet Page 2 of 3 Issue 7
- The Silicone outer rain sheds of the Termination makes it ideal for zones with maximum environmental contamination, industrial or coastal.
- Creepage path connection for additional protection in areas of high pollution.
Close
3M High Voltage Cold Shrink Termination Kit 110kv(123kv)/132kv(145kv)
- Light weight
- Dry design - does not require liquid dielectric
- Can be installed at any angle or inverted
- No special maintenance required
- Top - and bottom - sealing system based on proven cold shrink technology
- Alternating sheds (skirts)
- One-piece factory-tested push-on termination body
Close
3M Armorcast Structural Material 4560-15
- Flexible fiberglass knit fabric strip, saturated with a curable black urethane resin syrup that starts to cure after adding water
- Once wet, the fiber strip becomes tacky and sticks to itself
- Compatible with coaxial, copper, fiber cables, polyethylene or lead-sheathed cable, pressurized and non-pressurized cable
- Creates an airtight, permanent bond when combined with vinyl mastic VM tape and vinyl tape 50
- Suitable for aerial, buried and manhole applications
- Ideal for strengthening old cables, splices and auxiliary seals
- Fast and easy to apply, yet hardens to a strong and maintenance-free coating
- RoHS 2011/65/EU Compliant
- 5/bulk pack
- It works for sheath repairs, trouble openings, 90(deg) bends, long length repairs, and T-zone damage
- Can be used on pressurized or nonpressurized cable and on either polyethylene or leadsheathed cable
- Perfect for sheath repair, trouble openings in poly cable, and T-zone repair
Close
3M Anti Rodent Repellent Spray
- Keeps away rodents/Mice
- Repellant Coating
- Automotive usages
Close
3M Fire Dam 2000 Coating
- Good adhesion to most surfaces
- Up to 4 hours fire rating for penetration
- Applied using common trade tools, Spray, trowel or brush
Close
Close
3M Heat Shrink Thin-Wall Tubing FP-301
3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a variety of industrial and military applications. FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow.
